ALERATEC HDD CRUISER HARD DISK DRIVE SANITIZER AND DUPLICATOR - Part 350101 Sanitize 4 HDDs or Duplicate 3 HDDs simultaneously Drives locked during operation for security 10 Fans and Aluminum drive trays for optimum cooling Stand Alone, Np Computer Required Sanitizes - Wipes up to 4 drives clean with Overwrites as recommended in Government Specifications One Pass Three Pass with verify Seven Pass DoD Wipe Duplicates - Makes up to 3 HDD copies at once 10 Fans and Aluminum drive trays for optimum cooling Keyed Trays must be locked to operate Individual Removable tray for each drive Tamper Resistant Sanitizing and Duplicating *For 3.5" IDE Hard Disk Drives, 2.5" Adapter Available Part# 350101 UPC 808068-00394-6 The Aleratec HDD Cruiser will simultaneously sanitize up to 4 HDDs to assure that all confidential datal is unreadable. It can also duplicate up to 3 HDDs simultaneously. The sanitizing capability is particularly important with the rapid advancement of hard drives; upgrading existing drives is commonplace and it is important that confidential data be removed from the old drives before they are recycled or discarded. The HDD Cruiser is a stand alone unit and no computer is required for operation so there is no need to tie up a computer for hours running complex software to duplicate or sanitize hard disk drives. The HDD Cruiser has individual, removable, locking, aluminum drive trays. In both sanitizing and duplicating the controller must access the entire capacity of each drive, so the drives must run for extended periods and cooling is of the utmost importance. The HDD Cruiser has 10 ultra quiet cooling fans and the "only from Aleratec" aluminum drive trays offer the best possible thermal conductivity. The locking trays offer important tamper resistance to help prevent interruption of either a duplicating or sanitizing operation. |