 |  | 

F.G-7600-000A ICS IMAGEMASSTER SOLO 3 IT
Copied data can be verified to achieve maximum reliability. On the fly MD5 or CRC32 hashing capabilities are available using the sector-by-sector copy mode to guarantee exact replica of the source's data without modification, re-arrangement or corruption. The byte-by-byte Verification function is available when using the ICS Intelligent Copy mode, which copies only allocated files. The source's copied data can be transferred using the unit’s direct drive to drive interface or using the unit’s external Firewire/USB interface to copy data from a source's unopened computer. The IM Solo-3 IT duplicator supports IDE, SATA and SCSI hard disk drives, including ATA Flash devices. The unit’s advanced touch screen user-interface provides ease of use. IM Solo-3 IT can copy data to two hard drives simultaneously without any speed reduction. Copy from SCSI to SCSI drives with the additional purchase of the FAST SCSI option
.: MD5 and CRC32 Hashing: Simultaneous MD5 and CRC32 hashing generation can be performed during the data copy opration. (Note: Hashing is supported using the sector-by-sector copy mode only)
.: Touch Screen User Interface: The unit’s advanced Touch Screen User Interface and programmed keyboard provides for ease of use.
.: High Speed Operation: Data copied at transfer rates that exceed 3GB/min.
.: Built in Write Protection: Source's data is protected with built-in write protection.
.: Built in FireWire 1384B and USB 2.0 Interface: Copy data from a Source's unopened Notebook or PC. Also, safely preview the Source's drive while connected to the IM Solo-3's write protected port.
.: Copy to Two Target Drives Simultaneously: Copy data to two hard drives simultaneously at high speeds, without speed reduction.
.: Multiple Copy Methods: Copy data using a sector-by-sector copy mode or using the ICS' Intelligent Copy mode, which copies only allocated files.
.: WipeOut: Sanitize drives and erase data at speeds greater than 3GB/min.
.: Multiple Media Support: Supports data transfer between P-ATA, S-ATA and SCSI hard disk drives (Note: SCSI drives are supported with optional hardware). Also supports imaging data from flash media devices and Notebook drives.
.: Upgradable: Software and Firmware upgrades performed using the supplied Compact Flash Card.
|
|