 |  | 
BRSLA-0401-DC HP LTO3 400/800GB LOADER MODULE
BRSLA-0401-DC STORAGETEK LTO-3 LOADER MODULE
Brule River 2-Ply
Brule River 2-Ply
Brule River 2-Ply
Brule River 2-Ply
Brule River 2-Ply
Brule River 2-Ply
Brule River 2-Ply
BRUNTON DOUBLE SUCTION SYSTEM W/ 1/4"-20
BRUSH 37-005
Brush Metal Case for iPhone 11 Pro - Black
Brush Metal Case for iPhone 11 Pro - Gold
Brush Metal Case for iPhone 11 Pro Max - Black
Brush Metal Case for iPhone 11 Pro Max - Gold
BRUSH, REMOVE PAPER RICOH C6000
Brushless Motor DC24 Volt - 20 Watt FOR USE IN MODELS: Gestetner DSM MP1350, Gestetner DSM MP9000, Gestetner DSM7135, Gestetner DSM790, Lanier LD1135, Lanier LD190, Ricoh Aficio MP1100 (961317), Ricoh Aficio MP1350 (961319), Ricoh Aficio MP9000 (412958), Savin 8090, Savin 8135, Toshiba E STUDIO 1101, Toshiba E STUDIO 1351, Toshiba E STUDIO 901
BRUSHLESS MOTOR/40 C224
BRV-1 Bluetooth spkr Black/Orange/Gr
BRV-1 Bluetooth spkr Gray/White/Turq
BRV-X Black with Black Relief and
BRV-X Grey with White Relief and
BSL-1, Spare battery sled for TR200/300. The Telex BSL-1 is a spare or replacement battery sled with a capacity of 6 "AA"-sized Nickel Metal Hydride rechargeable batteries, designed for use with the TR-200 and TR-300 series of VHF intercom beltpacks, and compatible with the BC-300NM1 and BC-300NM2 battery chargers.
BSP LogicKeyboard Advance Line Keyboard
BSP, CABLE SERIAL 10FT DB9F-DB9F NULL GREY
BT-1, Replacement Eartip For ET-1 Eartip (Bag Of 25) The Telex BT-1 is a bag of 25 salmon-colored silicone replacement eartips for specific use with the ET-1 personal monitoring and assisted listening eartip.
BT-2, Small Earcones For Use With ET-4 (Bag of Five) The Telex BT-2 is a bag of 5 small plastic earcones in a clear finish, designed for use with the Telex ET-4 coiled acoustic assistive listening and personal monitoring eartube.
BT-3, Medium Earcones For Use With ET-4 (Bag of Five)
BT-4, Large Earcones For Use With ET-4 (Bag of Five) The Telex BT-4 is a bag of 5 large plastic earcones in a clear finish, designed for use with the Telex ET-4 coiled acoustic assistive listening and personal monitoring eartube.
BT-70
BT1000X Water Proof Speaker
BTR(BRUSH)
BTR-24, 2.4 GHz multi-channel wireless Base Station/Access Point. Includes omni antennas, built in battery pack, rack mounts and US power supply. For use with TR-240 beltpacks. The BTR-24 from Telex is a wireless base station access point that can support up to 10 TR-24 beltpacks in full-duplex mode, and an unlimited number of listen-only users. This multi-channel base station uses the license-free 2.4GHz IEEE 802.11b WiFi standard. The unit has a built-in lithium ion battery that offers up to 10 hours of continuous operation. It can also run via wall power. The BTR-24 system offers three audio channels, which are selectable from each beltpack. Your privacy is ensured thanks to 64-bit audio encryption. The ClearScan feature automatically scans and selects the best RF channel for communication when the system is started.
BTR-240 Base Station, A4F Headset Jack The BTR-240 2.4GHz Wireless Intercom Base Station (A4F) from Telex is a slim rackmount intercom base station that offers high-quality communication and versatile options. The durable metal base station works in conjunction with TR-240 beltpacks to provide clear wireless communication using license-free 2.4GHz IEEE 802.11b WLAN technology. Up to 8 beltpacks can work together in full-duplex mode, while a virtually unlimited number of half-duplex beltpacks can also be added. You can expand your coverage range by adding BTR-24 access points to your system, and the beltpacks can also act as access points. The BTR-240 has multi-level security and audio encryption to ensure that your conversations stay private. ClearScan channel selection will automatically choose the best available wireless channel. The unit also has a 2-wire and 4-wire intercom interface to support wired beltpack operation. The A4F headset connector can automatically detect whether your headset has an electret or dynamic microphone, and will adjust accordingly. The front panel has an easy-to-read LCD display that shows system status, and it also has easy-to-use controls for convenient operation. There are multiple antenna options and accessories available so you can modify your intercom system to meet your particular needs.
BTR-240 Base Station, A4M Headset Jack License Free 2.4GHz, IEEE 802.11b WLAN technology Expand coverage using BTR-24 access points Multi-level security and audio encryption 2-wire and 4-wire intercom interface ClearScan channel selection Auto-select Electret or Dynamic microphone Choice of two (2) independent or simultaneous audio channels TR-240 beltpacks operate wired or wireless Eight (8) full-duplex beltpacks with virtually unlimited number of half-duplex beltpacks TR-240 beltpacks can operate as an access point Multiple antenna options and accessories Durable ABS construction Easy-to-read LCD indicates system status Removable Li-Ion batteries with wide temperature range and up to eight (8) hours of operation.
BTR-240 Two-Channel 2.4Ghz Wireless Intercom System Designed to operate in full duplex communications with up to eight belt packs. Features include ClearScan auto frequency selection, loudspeaker output, four-wire intercom interface, two-wire intercom interface and loop thru XLR jacks, aux in and aux out XLR jacks, with headset jack, volume control, audio channel selection and ability to support beltpacks in a wired configuration via Ethernet. Antennas, power supply and rack mount included. The TR-240 beltpacks have the ability to be configured in one of three operating modes: wireless, wired, or master wireless. In wireless (normal) mode, beltpacks communicate to each other using the base station as a relay. In wired mode, beltpacks turn off their wireless ability and communicate via Ethernet cable or through a building’s existing Ethernet infrastructure. In master wireless mode, the beltpack acts as a mobile access point to provide wireless coverage for other beltpacks to communicate without an actual BTR-240 base station. The TR-240 beltpack has a removable lithium ion battery pack that provides up to eight (8) hours of uninterrupted operation. The battery pack can be charged directly in the case by plugging a power adapter into the beltpack or by placing the battery in the CHG-240 4-bay charger.
BTR-240 Two-Channel 2.4Ghz Wireless Intercom System Designed to operate in full duplex communications with up to eight belt packs. Features include ClearScan auto frequency selection, loudspeaker output, four-wire intercom interface, two-wire intercom interface and loop thru XLR jacks, aux in and aux out XLR jacks, with headset jack, volume control, audio channel selection and ability to support beltpacks in a wired configuration via Ethernet. Antennas, power supply and rack mount included. The TR-240 beltpacks have the ability to be configured in one of three operating modes: wireless, wired, or master wireless. In wireless (normal) mode, beltpacks communicate to each other using the base station as a relay. In wired mode, beltpacks turn off their wireless ability and communicate via Ethernet cable or through a building’s existing Ethernet infrastructure. In master wireless mode, the beltpack acts as a mobile access point to provide wireless coverage for other beltpacks to communicate without an actual BTR-240 base station. The TR-240 beltpack has a removable lithium ion battery pack that provides up to eight (8) hours of uninterrupted operation. The battery pack can be charged directly in the case by plugging a power adapter into the beltpack or by placing the battery in the CHG-240 4-bay charger.
BTR-800 Base Station RTS, A4F Headset Jack, A3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A4F Headset Jack, B3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A4F Headset Jack, C3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on C3: 554-572MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A4F Headset Jack, E88 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A4F Headset Jack, F3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on F3: 482-500MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A4F Headset Jack, H3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on H3: 500-518MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, A3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, B3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A5F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, C3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A5F RTS headset jack and works on C3: 554-572MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, E88 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, F3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A5F RTS headset jack and works on F3: 482-500MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station RTS, A5F Headset Jack, H3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A5F RTS headset jack and works on H3: 500-518MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
BTR-800 Base Station, A4M Headset Jack, A3 BAND The Telex BTR-800 is a 2-channel, frequency-agile UHF wireless intercom Base Station, with channel access from each of four full-duplex beltpacks, stage announce output with relay closure, wireless talk around (ISO), the patented Enhanced ClearScan channel search feature, and a talk/listen headset station at the base. The BTR-800 features a transparent graphical user interface and a backlit display, with advanced technology functions such as combination tone code/RF noise squelch and DSP digital audio processing. This unit has an A4F RTS headset jack and works on B3: 536-554MHz Transmit/650-668MHz Receive frequencies. Wireless UHF intercom Base Station with frequency agility, full-duplexing, and huge selection of available frequencies organized in independent 18MHz bands Factory selected preset frequency groups, 1000' operating range, Transmit power level switch Independent front Portable Station enable/disable buttons with LED status indicators, Telex or RTS front panel 4-pin headset connector reads dynamic or electret headset boom mic type automatically Enhanced ClearScan two-button frequency selection for optimal, interference- and intermodulation-free location use, ranks available frequencies in order of reliability Simultaneous support of up to 4 beltpacks, expandable Large backlit LCD, transparent, menu-driven Graphic User Interface for simplified navigation and assignment Full function Talk/Listen headset station with dedicated headset and boom mic volume and gain controls ,allows for fifth simultaneous user(director, producer, engineer) on intercom channel Compatibility with Audiocom, Clear-Com, RTS/RTS matrix wired and wireless intercoms, dedicated 2-wire XLE and 4-wire RJ-11 connectors Dual Voltage power supply for international use, XLR balanced Auxiliary audio input and output connectivity
|
|