StorageStor Index

COMMSCOPE Center Bracket for Monopole T-Frames
COMMSCOPE Chain Mount Base Kit 14 in stand-off 16 ft chain
COMMSCOPE Chain Mount Base Kit 14 in stand-off 8 ft chain
COMMSCOPE Chimney Mount Slider Bracket for Round Chimney Mounts 2-3/8" OD. Hot dip galvanized steel hardware included.
COMMSCOPE Chimney Mount Slider Bracket for Round Chimney Mounts 2-7/8" OD. Hot dip galvanized steel hardware included.
COMMSCOPE Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 2 stack hanger in 3/8" size. Constructed of stainless steel.
COMMSCOPE Click-On Hanger Hardware Kit for 1/2" 5/8" or 7/8" coaxial cable.For use with (2) stack hangers in 3/8" size. Constructed of stainless steel.
COMMSCOPE Click-On Hanger Hardware Kit for 1/2" 5/8" or 7/8" coaxial cable.For use with (3) stack hanger in 3/8" size. Constructed of stainless steel.
COMMSCOPE Cluster Support Bracket 5 lines for 3-1/2 in OD round members
COMMSCOPE Cluster Support Bracket U-Bolt for 2-3/8 in OD round member attachment. Supports 7 cable runs. For 3/4" and 7/16" hangers.
COMMSCOPE Cluster Support Bracket with angle member attachment.
COMMSCOPE CNT-195 1.5M Jumper with N Female & TNC Male connectors.
COMMSCOPE CNT-195 1.5M Jumper with N Male & TNC Male connectors.
COMMSCOPE CNT-400 CNT 50 Ohm Braided Coaxial Cable black fire retardant riser rated PVC jacket
COMMSCOPE CNT-400 CNT® Jumper with interface types N Male and N Male 2 m
COMMSCOPE CNT-400 coaxial cable 100 M
COMMSCOPE CNT-400 coaxial cable 125 M
COMMSCOPE Co-location Dual Pipe Mount kit w/ dual 5.5 ft x 2-3/8 inch OD face pipe supports. Includes Frame Weldment Hardware Kit and (2) Pipe Mount Kits.
COMMSCOPE Coax Cover 4 Runs
COMMSCOPE Coaxial Cable Transition for WR90 8.2–12.4 GHz
COMMSCOPE Cold shrink kit for Ericsson RRU power connector or 3/8” cable with 4.3-10 connector to device with 4.3-10 connector.
COMMSCOPE Color indicating silica gel dessicant replacement 5 lbs. Orange when dry green when saturated. Cobalt-chloride free.
COMMSCOPE combines bias tee and surge protection into 1 multiband unit.806-960 /1710-2170 MHz 50 ohms. SMA F for DC & DM Antenna Side and DF equipment side
COMMSCOPE Complete Mount for VHLP(X)3 Antennas.
COMMSCOPE Compression Fitting Parts Kit
COMMSCOPE Compressor Overhaul Kit MT050C MT500D
COMMSCOPE Connector Hardware Kit for UG-343B/U flange.
COMMSCOPE Connector Hardware Kit for UG-541A/U flange.
COMMSCOPE Connector Reattachment Kit for elliptical waveguide 132. Includes: Compression ring O-ring Saw guide Silicone grease 2 EW gaskets.
COMMSCOPE Connector Reattachment Kit for EW43.
COMMSCOPE Connector/Splice Weather- Proofing Kit. (6) rolls 2-1/2"x24" butyl tape. (2) rolls of 3/4"x66' black elec. tape and (1) roll 2"x20' black elec tape
COMMSCOPE Copper Ground Buss Bar 1/4 in x 2 in x 12 in
COMMSCOPE Corner Wall Mount Hardware Kit for 4-1/2" OD pipe. Pipe mount and wall mount hardware. Adjustable clamp spacing. U-bolts for pipe.
COMMSCOPE Corner Weldment for MT-195 Series
COMMSCOPE CPR112G Flange Hardware Kit
COMMSCOPE CPR229G Flange Hardware Kit. Includes flange gasket hex nuts lock washers screw wrench and socket head cap screws.
COMMSCOPE Crimp Tool for crimping connectors on CNT-300 and CNT-400 Cable. Hex die .324" and .429".
COMMSCOPE Crimp-on Lug for 3/8 in hardware #2 AWG two-hole
COMMSCOPE Crimping Tool for attaching grounding lugs to grounding kits. Attaches crimping lugs to ground wire.
COMMSCOPE Crossover Angle 2-3/8" OD to 2-3/8" OD pipe. Includes Angles and U-bolts.
COMMSCOPE Crossover Clamp joins 1-1/2 in to 2-1/2 in OD pipe to 2-3/8 in to 5 in OD pipe
COMMSCOPE Crossover Clamp. Joins two 2-1/2" to 3-1/2" OD pipe to 2-3/8" to 5" OD pipe at a right angle. Hot dipped galvanized. Sold individually.
COMMSCOPE Crossover Plate Universal Round joins range of 2-3/8 up to to 3-1/2in OD round members
COMMSCOPE Crossover plate 2.875” OD to 2.875" OD
COMMSCOPE Crossover plate for joining 2-3/8 inch pipe to 4-1/2 inch pipe. Includes plates and U-bolts. For use on non-tapered towers.
COMMSCOPE Crossover Plate. Joins two 2" OD to 5" OD pipe. Hot dipped galv. steel. Clamp Style. "CO" Series.
COMMSCOPE Crossover Plate. Joins two 1-1/2" OD to 3-1/2" OD pipe. Hot dipped galvanized steel. Clamp Style. "CO" series.
COMMSCOPE Crossover Plate. Joins two 2"-5" OD to 4"-9" OD pipe. Hot dipped galvanized steel. Clamp Style. "CO" series.
COMMSCOPE Crossover Plate. U-bold style. 2-7/8" to 3-1/2" OD round members Hot dipped galvanized steel.
COMMSCOPE Crossover Plate. U-bolt style. 2-3/8" to 3-1/2" OD pipe. Hot dipped galvanized steel.