COMMSCOPE Low PIM Termination 100W Load 555-2700MHz. N Male interface 50 ohm 1.25:1 19.0 dB min return loss silver.
COMMSCOPE Low PIM Termination 10W Load 555-2700 MHz with N Male connectors. Silver 50 OHm 1.25:1 19.0 dB min Return Loss
COMMSCOPE Low PIM Termination 30 W Load 555-2700 MHz with N Male connectors. Silver 50 ohm 1.25:1 19.0 dB min Return Loss.
COMMSCOPE Low PIM Termination 50 W Load DC-3GHz. 4.3-10 Male
COMMSCOPE Low PIM Termination 50 Watt Load 698-2700 MHz. 7-16 DIN Male connector. 50 ohm impedance 19.0 dB minimum return loss 1.25:1 VSWR. Silver
COMMSCOPE Low PIM Termination Load 10 W Load 555-2700 MHz 7-16 DIN Male Interface Silver.
COMMSCOPE Low Profile Dual Back-to-Back Remote Radio Mount
COMMSCOPE Low Profile Platform Weldment. For use with Stackable Pod Mount Assemblies.
COMMSCOPE Low Profile Platform Weldmonts (3) Platform weldmonts. For use on a 10" to 30" OD ring mount with 14'6" pipes.
COMMSCOPE Low-pressure tank with regulator includes 90 deg elbow fitting anchor kit instruction sheet male connector fitting PTFE tape.
COMMSCOPE Lowering Raising Device
COMMSCOPE LSF2 3/8" Jumper 43M 43M 5'
COMMSCOPE LSF2-50 SureFlex Jumper with interface types 4.3-10 Male and NEX10 Male 3ft
COMMSCOPE M101 Type Surface Mount Box single port ivory. For use with M-Series modular information outlets.
COMMSCOPE M104 Type Surface Mount Box Four Port Gray
COMMSCOPE M200 Surface Mount Box two port ivory. For use with M-Series modular information outlet.
COMMSCOPE M200 Surface Mount Box two port white. For use with M-Series modular information outlet.
COMMSCOPE M4800A 1U Angled Panel 48 port for SYSTIMAX Category 5E Information Outlets and Uniprise Category 6 and 5E Information Outlets
COMMSCOPE Mains block kit AC.
COMMSCOPE Male End Cap for 4.3-10 series connectors.
COMMSCOPE Manual Cable Preparation Tool for 7/8 in coaxial cable and D-Class connectors
COMMSCOPE Metal Pole Top Mounting Kit 3.5-6 In Diameter
COMMSCOPE Meter HR 10-80 VDC 1/4 Term.
COMMSCOPE Metro Cell mounting kit with shroud. Capability of mounting round antenna types on the side of a pole or on the side of a building.
COMMSCOPE Metro Cell mounting kit with shroud. Mounts round antenna types on the top of a pole. For installations of 7.9" canister small cell antennas
COMMSCOPE Metro Cell mounting kit with shroud. Mounts round antenna types on top of a pole and the side of a building. Includes brackets and hardware
COMMSCOPE Metro Cell mounting kit. Mounts round antenna types on top/side of a pole and the side of a building. Includes brackets and hardware.
COMMSCOPE Metro Cell Mounting Pole PTP Trans Kit 18" to 8" Light Gray
COMMSCOPE Metrocell; Radio Encl; for up to 6x ERC PICO; pole Mtg Kit; w/AC Load center and OVP; diplexer; (8) RF Jumpers; Lt Grey
COMMSCOPE Microwave Dish Face Strut Support. 3/8" x 3" x 3" x 5' 6".
COMMSCOPE Mid-span Mount for 2-7/8 in OD mounting pipe plain end pipe not included
COMMSCOPE Middle of Pole Pico Concealment Enclosure for low power remote micro radio heads Sepia Brown.
COMMSCOPE Mini Monopole for Stackable Pod Mount Assembly 10 ft
COMMSCOPE Modular Plug 6P/6C unshielded long body flat oval 2.79 x 6.85 mm cable jack OD category 3
COMMSCOPE Modular Plug Category 6A/6 Unshielded Cond Insulation OD - 0.99mm 100 pcs
COMMSCOPE Modular Plug Die Only 6 Position MP-66_-_ Plugs Blue Dot
COMMSCOPE Modular Plug Die Only 8 Position CAT5E MP-5E Plugs White Dot
COMMSCOPE Modular Plug Hand Tool with Die for Shielded Plugs C Size Shield (5.7- 7.0mm)
COMMSCOPE Modular Plug Kit 8P/8C shielded round 5.1 mm max cable jack OD 8-position category 5
COMMSCOPE Modular Plug Kit 8P/8C unshielded round 5.1 mm max cable jack OD 8-position
COMMSCOPE Modular Plug Kit category 5e 8P/8C shielded 4.8 – 5.6 mm max cable jack OD 8-position 100/BAG
COMMSCOPE Module 2 circuit Bypass module Patent Pending
COMMSCOPE MOJAVE Dryer Tube Kit
COMMSCOPE Monopole Co-location T-Frame Kit 12-50" OD mounting diameter 6.5' face width. Includes cell pipe frames pipe mounts ring mount stand-off arms.
COMMSCOPE Monopole Load Distribution Reinforcement Kit 4 Sector 10" to 30" OD 36" Kicker
COMMSCOPE Monopole Load Distribution Reinforcement Kit 4 Sector 10" to 30" OD 60" Kicker
COMMSCOPE Mount Hardware Kit for 8' and 10' Shielded Antenna.
COMMSCOPE MT-524 2 in x 2 in x 20 ft Angle. Constructed of 3/16" hot-dip galvanized steel.
COMMSCOPE MT-546-170 Plain End Pipe 2-7/8 in OD x 170 in Hot dip galvanized steel
COMMSCOPE MT050B Series Filter Elements Replacement Kit. Includes 1.0 micron fiter element air filter and instruction sheet.
Prev
|
Next