 |  | 
CONNEX N male to TNC male adapter. Nickel plated body gold pin teflon dielectric.
CONNEX CORP. SMA Male Right Angle Long Barrel connector for RG58 cable. Commonly used with Breezecom Radios.
CONNEX crimp tool for crimping connectors on RG174 188 316 179 187 180 190 and AT&T 735A cable. Cavity sizes .178 .128 or .068.
CONNEX N female to SMA male straight adapter. Nickel plated body gold plated contacts.
CONNEX N-Male dust cap with 100 mm nickel plated brass chain and body. Silicone gasket. For use on N-Female connectors.
CONNEX SMA Male to SMB Female Straight Adapter.
CONNEX SMA-Female to SMB Male Straight Adapter
ConnexSys Cable Quick Ties (25 PK) Manage cables with Cable Quick Ties designed specifically to work with ConnexSys Video Wall Mounting System. ConnexSys Cable Quick Ties (25 PK) FeaturesSpecificationsResourcesVideosFAQ Key Features Quickly secure clips to strut channel with a 90 degree turn. Comes in quantities of 25. Can also be used to manage RapidDraw Display Release cords.
ConnexSys Device Holder The CSA100 enables secure attachment of AV equipment behind any ConnexSys Video Wall Mounting System. Slot design enables easy attachment of any device. Key Features Intended for use with the ConnexSys Video Wall Mounting System. Hangs easily from strut channel. A power strip can be attached to the side when used with LVS1U and LVSXU
ConnexSys Video Wall Landscape Mounting System with Rails Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements The LVS1U ConnexSys Video Wall system landscape mount ships with rails for each mount. Key Features SPEED Hang units on a single strut channel for quick row leveling No need for horizontal spacers Vertical measurement is simply the height of the display to the next rail Compatible with most 1-5/8" sizes of channel strut Reduces installation time - especially for XL and recessed configurations Tool-free ClickConnect™ latching secures displays PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mount ALIGNMENT PowerZone™ Adjustments Height adjustment ±1" on each interface Tilt adjustment at single pivot point, protects displays from twisting Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations Both sides adjust independently, compensating for imperfections in the wall Walls can be out of alignment by up to 2" (horizontally) 3 levels of lateral adjustment Mount left/right along rail Interface left/right along mount Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions SERVICEABILITY RapidDraw™ Display Release Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service Protects displays by not requiring an aggressive push to release/pop-out Releases only on demand, preventing accidental pop-outs The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle Kickstand provides 20 degrees of bottom tilt access RIGIDITY Rigid frame keeps displays where you set them, even after extending for service Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes MISCELLANEOUS Security - pad lock ¼" shank diameter Safety tested Universal interface Each mount comes out of the box with adjustments set in the exact same position
ConnexSys Video Wall Landscape Mounting System with Rails, TAA Compliant Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements The LVS1U ConnexSys Video Wall system landscape mount ships with rails for each mount. Key Features SPEED Hang units on a single strut channel for quick row leveling No need for horizontal spacers Vertical measurement is simply the height of the display to the next rail Compatible with most 1-5/8" sizes of channel strut Reduces installation time - especially for XL and recessed configurations Tool-free ClickConnect latching secures displays PowerZone provides 6 points of adjustment in one easy-to-access location at the top of the mount ALIGNMENT PowerZone Adjustments Height adjustment ±1" on each interface Tilt adjustment at single pivot point, protects displays from twisting Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations Both sides adjust independently, compensating for imperfections in the wall Walls can be out of alignment by up to 2" (horizontally) 3 levels of lateral adjustment Mount left/right along rail Interface left/right along mount Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions SERVICEABILITY RapidDraw Display Release Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service Protects displays by not requiring an aggressive push to release/pop-out Releases only on demand, preventing accidental pop-outs The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle Kickstand provides 20 degrees of bottom tilt access RIGIDITY Rigid frame keeps displays where you set them, even after extending for service Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes MISCELLANEOUS Security - pad lock ¼" shank diameter Safety tested Universal interface Each mount comes out of the box with adjustments set in the exact same position
ConnexSys Video Wall Landscape Mounting System without Rails Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements. The LVSXU ConnexSys Video Wall system landscape mount ships without rails. Installers can source strut locally to hang multiple mounts to one rail and reduce installation time. Key Features SPEED Hang units on a single strut channel for quick row leveling No need for horizontal spacers Vertical measurement is simply the height of the display to the next rail Compatible with most 1-5/8" sizes of channel strut Reduces installation time - especially for XL and recessed configurations Tool-free ClickConnect™ latching secures displays PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mount ALIGNMENT PowerZone™ Adjustments Height adjustment ±1" on each interface Tilt adjustment at single pivot point, protects displays from twisting Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations Both sides adjust independently, compensating for imperfections in the wall Walls can be out of alignment by up to 2" (horizontally) 3 levels of lateral adjustment Mount left/right along rail Interface left/right along mount Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions SERVICEABILITY RapidDraw™ Display Release Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service Protects displays by not requiring an aggressive push to release/pop-out Releases only on demand, preventing accidental pop-outs The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle Kickstand provides 20 degrees of bottom tilt access RIGIDITY Rigid frame keeps displays where you set them, even after extending for service Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes MISCELLANEOUS Security - pad lock ¼" shank diameter Safety tested Universal interface Each mount comes out of the box with adjustments set in the exact same position
ConnexSys Video Wall Portrait Mounting System with Rails Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements. The LVS1UP ConnexSys Video Wall system portrait mount ships with rails for each mount. Key Features SPEED Hang units on a single strut channel for quick row leveling No need for horizontal spacers Vertical measurement is simply the height of the display to the next rail Compatible with most 1-5/8" sizes of channel strut Reduces installation time - especially for XL and recessed configurations Tool-free ClickConnect™ latching secures displays PowerZone™ provides 6 points of adjustment in one easy-to-access location at the top of the mount ALIGNMENT PowerZone™ Adjustments Height adjustment ±1" on each interface Tilt adjustment at single pivot point, protects displays from twisting Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations Both sides adjust independently, compensating for imperfections in the wall Walls can be out of alignment by up to 2" (horizontally) 3 levels of lateral adjustment Mount left/right along rail Interface left/right along mount Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions SERVICEABILITY RapidDraw™ Display Release Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service Protects displays by not requiring an aggressive push to release/pop-out Releases only on demand, preventing accidental pop-outs The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle Kickstand provides 20 degrees of bottom tilt access RIGIDITY Rigid frame keeps displays where you set them, even after extending for service Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes MISCELLANEOUS Security - pad lock ¼" shank diameter Safety tested Universal interface Each mount comes out of the box with adjustments set in the exact same position
ConnexSys Video Wall Portrait Mounting System without Rails Chief's ConnexSys Video Wall Mounting System solves common video wall challenges of speed, alignment, serviceability and rigidity. The ConnexSys Video Wall Mounting System provides the ability to level each row once by using strut channel to connect multiple mounts together with a simple-to-install system that can handle the largest requirements. The LVSXUP ConnexSys Video Wall system portrait mount ships without rails. Installers can source strut locally to hang multiple mounts to one rail and reduce installation time. Key Features SPEED Hang units on a single strut channel for quick row leveling No need for horizontal spacers Vertical measurement is simply the height of the display to the next rail Compatible with most 1-5/8" sizes of channel strut Reduces installation time - especially for XL and recessed configurations Tool-free ClickConnect latching secures displays PowerZone provides 6 points of adjustment in one easy-to-access location at the top of the mount ALIGNMENT PowerZone Adjustments Height adjustment ±1" on each interface Tilt adjustment at single pivot point, protects displays from twisting Depth can be set between 4" and 7.4" from the wall, providing a range of "home positions" ideal for recessed installations Both sides adjust independently, compensating for imperfections in the wall Walls can be out of alignment by up to 2" (horizontally) 3 levels of lateral adjustment Mount left/right along rail Interface left/right along mount Lock in lateral guide for fine-tune adjustment using turn knobs, protecting screens from potential collisions SERVICEABILITY RapidDraw Display Release Cord release system gently and remotely pops any screen out for easy access and can be extended 13.4" for service Protects displays by not requiring an aggressive push to release/pop-out Releases only on demand, preventing accidental pop-outs The 10' (304.8 cm) cord can be set up to pull for release from any 90 degree angle Kickstand provides 20 degrees of bottom tilt access RIGIDITY Rigid frame keeps displays where you set them, even after extending for service Adjustable home depth position locks screens in place to maintain alignment despite accidental bumps/pushes MISCELLANEOUS Security - pad lock ¼" shank diameter Safety tested Universal interface Each mount comes out of the box with adjustments set in the exact same position
ConnexSys Wall Cover 2-Bracket Pack
Conquer low-light scenes with this Sony HVL-LEIR1 battery-powered LED video and infrared light. Perfect for use with your Handycam camcorder or Alpha camera, this compact light easily attaches via your camera's multi interface shoe or with the optional bracket. This 1,500lux LED light provides solid, steady lighting and features a built-in IR light for ultra dark settings. Control brightness with the convenient dial for the perfect level of light. Includes an amber colored filter.
Consists of two Single Mode SFP+ transceivers to upgrade the Avio F120 and F125 units and support distances of up to 2Km
consists of: Cine 30 HD fluid head (#3006) + tripod EFP 2 CF (#6386) + mid-level spreader 100/150 (#7007) + rubber feet 100/150 (#7004)
consists of: FSB 4 fluid head + tripod ENG 75/2 D (#4188) + set mid-level spreader 75 (#7011) + padded bag DV 75 S (#9108)
consists of: Video 25 Plus FB fluid head (#2501P) + Multi Disc (#3914) + Pedestal C III (#5195) The Sachtler 2570 System 25 Plus CIII Pedestal is designed with today's camera person using HTDV and Widescreen cameras in mind. The System 25 Plus Pedestal system consists of the, Video 25 Plus fluid head with its seven step, temperature-independent damping system. This head is matched with the CIII compact pedestal and Multi Disc for a complete package. Video 25 Plus Fluid Head Frictionless Leak Proof Fluid Damping Frictionless leak proof fluid damping with seven levels of drag, for perfect pictures while panning, without jerks and vibrations. Identical across both horizontal and vertical planes, and allows complete disengagement of drag for fast panning. Quick Release Touch & Go Quick Release / Automatic Locking System, for quick set up without having to bother screwing the camera to head and then having to unscrew it again. Also features a safety lock lever that prevents inadvertent disengagement of the camera latch. Sliding Balance Plate Sliding camera mount and plate with a 4.4-inch sliding range, makes a fast balancing system for the camera and ensures perfect balance across the horizontal plane. Dynamic Counterbalancing System The 18 Step dynamic counterbalancing system, with 9-stage fine-tuning in half steps compensates for torques as the camera tilts. This prevents the camera from inadvertently tipping, and ensures that it is positioned securely at any tilt angle. These features can be activated and deactivated individually. CIII Pedestal System Air Pressurized Pneumatic Column The pedestal is anchored by a pneumatic column. The system works on the principle of compressed air, which acts as a counterweight and allows for quick height adjustments. An air pressure gauge gives the user instant indication of correct pressure. Silent Dolly Movement Silent dolly movement is very important in a studio where sounds can easily carry into the production. Set-Up This pedestal offers a fast tool-free set-up for productions on the go.
CONSOLE 6" LONG BROTHER PRINT ARMREST
Console Cable USB Type A and Mini-B Cisco Compatible- 6FT
Console cable with 4-pin connector
Console Cable with RJ45 and DB9F Cisco Compatible- 6FT
CONSOLE FOR ALL VTM SERIES ON SCREEN MONITOR INSTRUMENTS INC Console for all VTM Series on screen monitor instruments. Included are the chassis, power supply, cooling system fans, system controller, front panel controls with USB port, and back panel connections for Ethernet, USB port, one router and remote control port, and LTC/GPI interface. A GDE Module - (VTM-OPT 10 or 40) and at least one input module are required to operate the console
CONSOLE LEG KIT 2006- CHEVY IMPALA
CONSOLE LEG KIT 2011-12 DODGE CHARGER
CONSOLE LEG KIT CHEVY 1500, 2500, 3500
CONSOLE LEG KIT CHEVY GMC SUBURBAN TAHOE
CONSOLE LEG KIT CHEVY GMC TAHOE & TRUCK
CONSOLE LEG KIT CHEVY IMPALA 2006-2008
CONSOLE LEG KIT DODGE CHARGER, MAGNUM
CONSOLE LEG KIT FORD EXCURSION, F250-750
CONSOLE LEG KIT FORD F-150 2004-
CONSOLE LEG KIT FORD F-150 2015-16
CONSOLE LEG KIT FORD F-150 2015-2016
Console mount kit. An all-metal mounting bracket that allows you to install a single RTS main console module into a standard 1RU 19" equipment rack.
Console Port Adapter for the Advanced Console Server, DB25 Male DCE
Console Port Adapter for the Advanced Console Server, DB25 Male DTE
Console Port Adapter for the Advanced Console Server, DB9 Female DTE
Console Port Adapter for the Advanced Console Server, DB9 Male DTE
Console Server Adapter for Value Line Console Server, DB25F to RJ-45
Console Server Adapter for Value Line Console Server, DB25M to RJ-45
Console Server Adapter for Value Line Console Server, DB9F to RJ-45
Console Server Adapter for Value Line Console Server, DB9M to RJ-45
Console Server Dumb Terminal Adapter - RJ-45 to DB9 Male
Console Server PC DTE Adapter - RJ-45 to DB9 Female
CONSOLE TELESCOPIC ARM REST 7"
CONSOLE TELESCOPIC ARM REST UBOLT STYLE
CONSOLE TELESCOPIC BROTHER PRINT ARMREST
|
|