 |  | 
CopperHead 3404 4K Base Station with Internal DC Power Supply, w/SMPTE 304M connector. Four-Wire Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. Clear-Com Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. Four-wire Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. RTS Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). Clear-Com Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). Four-Wire Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). RTS Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). Four-Wire Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). Clear-Com Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 4K Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). RTS Intercom interface. Includes internal CWDM and 4-channel 4K demux Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404 Camera 4K video cable - 9 inch DIN 1.0/2.3 right angle to BNC, kit of 4 cables. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, MX Swivel, Anton/Bauer mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, MX Swivel, Anton/Bauer mount camera side, V-Mount battery mount. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, MX Swivel, V-mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, MX Swivel, V-mount camera side, Anton/Bauer battery mount. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, OpticalConn Swivel, Anton/Bauer camera mount, V-mount battery. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, OpticalConn Swivel, Anton/Bauer mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, OpticalConn Swivel, V-mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, OpticalConn Swivel, V-mount camera, Anton/Bauer battery mount. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, SMPTE 304 Swivel, Anton/ Bauer camera mount, V-mount battery mount. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, SMPTE 304 Swivel, Anton/Bauer mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, SMPTE 304 Swivel, V-mount both sides. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead 3404K Quad-link 3G 4K camera unit, 2 SM fibers, SMPTE 304 Swivel, V-mount Cam Side, Anton /Bauer Mount batt side. Increase your 4K camera's versatility The CopperHead 3404K fiber transceiver takes the pristine and unrivaled image quality of dual/quad -link 4K cameras and delivers it into a multi-camera environment for in-studio or outside broadcast productions. The CopperHead 3404K conveniently distributes all of the signals needed for multi-camera 4K/UHDTV production using a single tactical or SMPTE hybrid fiber cable, ensuring robust, trouble-free connectivity on any studio or remote production. Integrated camera unit The compact CopperHead 3404K camera-mount transceiver affixes easily to dual and quad link 3Gbps/HD-SDI 4K cameras, providing power and four 3Gbps/HD-SDI signal paths from the camera to the base station. Full camera control is provided by the manufacturer's control panel or the CHRCP-2050A universal control panel. A 10/100 ethernet path, genlock, intercom and audio paths are also provided. Fiber optic integrity Since the CopperHead 3404K transmits all signals digitally and optically, you are assured of the highest quality signals - free from interference, grounding problems or drifting due to temperature variations. CopperHead 3404K is your solution to the size, weight and transmission problems of ordinary bundles of copper cabling – saving you time and effort and ensuring an efficient production. Key features and benefits All camera signals on one SMPTE hybrid fiber cable or lightweight tactical fiber cable Long distance range (multiple kilometers) Four uncompressed 1.5 or 3 Gbps HD-SDI signals from camera to base Full remote camera control with manufacturer's controller or universal CHRCP-2050A controller Two channels of RTS, Clear-Com® or 4-Wire intercom connectivity Return HD-SDI video signal Sync option to lock to the phasing of the studio clock (genlock like HD-SDI sync) Four bidirectional data streams: • Two RS-422 paths • One RS-232 path • One 10/100 Ethernet path Return audio Wide temperature range, low power consumption Parallel operation of fiber remote transmission and on-board recording Easy switch between standard camcorder mode and CopperHead mode
CopperHead G3 PowerWafer camera power adapter: AB mount. Works with CopperHead G3 Base Stations equipped with 95VDC internal power supply. PowerWafer camera adaptor with gold mount (for use with CH3-BS-PRO1-95VD)Note: Requires PowerWafer at camera
CopperHead G3 PowerWafer camera power adapter: V mount. Works with CopperHead G3 Base Stations equipped with 95VDC internal power supply. PowerWafer camera adaptor with V-mount (for use with CH3-BS-PRO1-95VD)Note: Requires PowerWafer at camera
CopperHead G3 throwdown 95VDC power supply. 2 STs to base, OpticalCon to cam. Requires PowerWafer.
CopperHead G3 throwdown 95VDC power supply. 2 STs to base, SMPTE 304M to cam. Requires PowerWafer.
CopperHead G3 throwdown 95VDC power supply. OpticalCON (dry) to base, OpticalCon (wet) to cam. Requires PowerWafer.
CopperHead G3 throwdown 95VDC power supply. 2 SCs to base, SMPTE 304M to cam. Requires PowerWafer
CopperHead G3200 Base Station with Internal DC Power Supply, w/OpticalConn receptacle. RTS Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply, w/OpticalConn receptacle. Clear-Com Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply, w/OpticalConn receptacle. Four Wire Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply, w/SMPTE 304M connector. RTS Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply, w/SMPTE 304M connector. Clear-Com Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply, w/SMPTE 304M connector. Four-Wire Intercom interface.
CopperHead G3200 Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. Clear-Com Intercom interface. The CopperHead™ 3200 system is a robust fiber optic link between your camcorder and your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) and analog (NTSC or PAL) program video, as well as all two-way camera control, audio, video, data, tally/call and intercom signals between the camera and the base station. Key features and benefits All camera signals on lightweight fiber cable Broadcast quality video and audio Return HD Video Two-channel intercom Multikilometer distance capability Battery mount options for Anton/Bauer or V-Mount Wide temperature range Low power consumption Multiple fiber connector options Two fiber cable options Tactical fiber • Military specification, battlefield proven • Requires local power at camera SMPTE hybrid fiber • Internal power supply delivers 95 W power to the camera up to 213 m (780 ft) • External PowerPlus delivers 100 W power to the camera up to 2 km (1.2 miles) 150 W opt. Use the TelePort™ 3G system to multiplex up to eight CopperHead™ 3200 systems onto a single strand of fiber Durable, high reliability design
CopperHead G3200 Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. Four-wire Intercom interface. The CopperHead™ 3200 system is a robust fiber optic link between your camcorder and your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) and analog (NTSC or PAL) program video, as well as all two-way camera control, audio, video, data, tally/call and intercom signals between the camera and the base station. Key features and benefits All camera signals on lightweight fiber cable Broadcast quality video and audio Return HD Video Two-channel intercom Multikilometer distance capability Battery mount options for Anton/Bauer or V-Mount Wide temperature range Low power consumption Multiple fiber connector options Two fiber cable options Tactical fiber • Military specification, battlefield proven • Requires local power at camera SMPTE hybrid fiber • Internal power supply delivers 95 W power to the camera up to 213 m (780 ft) • External PowerPlus delivers 100 W power to the camera up to 2 km (1.2 miles) 150 W opt. Use the TelePort™ 3G system to multiplex up to eight CopperHead™ 3200 systems onto a single strand of fiber Durable, high reliability design
CopperHead G3200 Base Station with Internal DC Power Supply: two ST connectors and Molex power jack. RTS Intercom interface. The CopperHead™ 3200 system is a robust fiber optic link between your camcorder and your truck, control room or "video village" position. The system will simultaneously transport both digital (SDI or HD-SDI) and analog (NTSC or PAL) program video, as well as all two-way camera control, audio, video, data, tally/call and intercom signals between the camera and the base station. Key features and benefits All camera signals on lightweight fiber cable Broadcast quality video and audio Return HD Video Two-channel intercom Multikilometer distance capability Battery mount options for Anton/Bauer or V-Mount Wide temperature range Low power consumption Multiple fiber connector options Two fiber cable options Tactical fiber • Military specification, battlefield proven • Requires local power at camera SMPTE hybrid fiber • Internal power supply delivers 95 W power to the camera up to 213 m (780 ft) • External PowerPlus delivers 100 W power to the camera up to 2 km (1.2 miles) 150 W opt. Use the TelePort™ 3G system to multiplex up to eight CopperHead™ 3200 systems onto a single strand of fiber Durable, high reliability design
CopperHead G3200 Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). Clear-Com Intercom interface.
CopperHead G3200 Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). Four-Wire Intercom interface.
CopperHead G3200 Base Station, dry fiber only, OpticalConn receptacle. Reqs 12VDC power supply (ADAP-AC-04). RTS Intercom interface.
CopperHead G3200 Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). Four-Wire Intercom interface.
CopperHead G3200 Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). Clear-Com Intercom interface.
CopperHead G3200 Base Station, dry fiber only, two ST connectors. Reqs 12VDC power supply (ADAP-AC-04). RTS Intercom interface.
CopperHead G3200 camera unit, 2 SM fibers, MX Swivel, Anton/Bauer camera side, V-Mount battery side Camera unit w/MX and gold mount to cam, V-shoe to batt
CopperHead G3200 camera unit, 2 SM fibers, MX Swivel, Anton/Bauer mount both sides Camera unit w/MX and two gold mounts
CopperHead G3200 camera unit, 2 SM fibers, MX Swivel, V-mount both sides Camera unit w/MX and V-mount on both sides
CopperHead G3200 camera unit, 2 SM fibers, MX Swivel, V-Mount camera side, Anton/Bauer mount battery side Camera unit w/MX and V-mount to cam, gold mount to batt
CopperHead G3200 camera unit, 2 SM fibers, OpticalConn Swivel, Anton/Bauer mount both sides
CopperHead G3200 camera unit, 2 SM fibers, OpticalConn Swivel, “V” mount both sides
|
|