 |  | 
CPI COMM. Termination panel for Kenwood NX700/NX800 radios. Use with TSRK100A series remote controls. 4 wire/full duplex option.
CPI COMM. Termination Panel for Kenwood TK790 890 690 series radios. Use with MCR411A remote control.
CPI Console Style DC Remote Control. Desktop split-bar microphone. Monitor intercom. Single channel.
CPI Console Style DC Remote Control. Desktop split-bar microphone. Monitor intercom. Single channel. Full duplex on four wires.
CPI Console Style DC Remote Control. Desktop split-bar microphone. Single channel intercom 2 line control/ monitor.
CPI Console Style DC Remote Control. Internal panel microphone. Monitor intercom. Single channel.
CPI Console Style DC Remote Control. Panel mounted gooseneck mic. Monitor intercom. Single channel.
CPI desk mike style remote control for the Motorola Radius and Maxtrac radios. Use only with MCP200/G termination panel
CPI handset w/o cord for TR10 DR10 LE10 MCR210 and new models that are 1) black 2) have a modular connector and 3) square non-removable mouthpiece.
CPI Telephone style remote control for Kenwood 5710/7150/7180/8150/8180 radios. Use with TSP150K (7150/8150) TSP180K (7180/8180) TSP710A (5710) panels.
CPI telephone style remote control for the Motorola Radius and Maxtrac radios. Use only with MCP200 series termination panels.
CPI telephone style remote control for the Motorola Radius and Maxtrac radios. Use only with MCP200 series termination panels.
CPI telephone style remote. 2 frequency uses sequential tone format. Monitor 4 wire operation. Modern white/tan housing.
CPI telephone style remote. 2 frequency uses sequential tone format. Monitor and intercom standard. New modern housing.
CPI telephone style remote. 2 frequency uses sequential tone format. Monitor and intercom standard. New modern housing. Black.
CPI telephone style remote. 4 frequency 4 wire operation. Black housing.
CPI telephone style remote. 4 wire simplex operation 12 Key DTMF Encoder Modern white/tan housing.
CPI Telephone-Style DC Remote Control. 1 Tx frequency. Off-hook monitor. Front panel push-to-talk. 2 watt audio. Modern housing.
CPI Telephone-Style DC Remote Control. 1 Tx frequency. Off-hook monitor. Front panel push-to-talk. 2 watt audio. Modern housing. Black color.
CPI Telephone-Style DC Remote Control. 2 Tx frequency. Off-hook monitor. Front panel push-to-talk. 2 watt audio. Modern housing.
CPMT19 Masters OEM
CPS2.4-II Power Amplifier, 2 x 450W @ 4 Ohms, 2U, XLR/Phoenix Type Inputs, Barrier Strip Outputs, ready for optional RCM-810 IRIS-Net Remot Control Module, 120V.
CPS2.6-II Power Amplifier, 2 x 600W @ 4 Ohms, 2U, XLR/Phoenix Type Inputs, Barrier Strip Outputs, ready for optional RCM-810 IRIS-Net Remote Control Module, 120V Various optional signal processing modules include 500Hz and 800Hz crossovers for cinema systems as well as the XHP Variable high-pass module for ZX, Sx and EVID loudspeakers. Like the CPS multi-channel amplifiers, CPS two-channel models also include a module slot for the RCM-810 remote-control module, enabling networking services for remote system diagnostics and control via IRIS-Net software.
CPS4.10 4-Channel Power Amplifier, 4 x 1000W into 2, or 4 Ohms, or 70V/100V Direct Drive, 2U, ready for RCM-810 IRIS-Net Remote Control Module, In/Outputs Phoenix Type, 120V. The CPS4.10 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 1000 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. Power output into either 2 O, 4 O, 70V- or 100V networks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters. In addition to remarkably low cur rent consumption and heat dissipation, the CPS4.10 provides remote standby switching with just 5 Watts consumption in standby mode. An optional remote control module RCM-810 provides control and supervision features via IRIS-Net, including monitoring o f amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 O and 10 O, in steps of 0.1 O.
CPS4.5 4-Channel Power Amplifier, 4 x 500W into 2, or 4 Ohms, or 70V/100V Direct Drive, 2U, ready for RCM-810 IRIS-Net Remote Control Module, In/Outputs Phoenix Type, 120V The CPS4.10 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 1000 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. Power output into either 2 O, 4 O, 70V- or 100V networks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters. In addition to remarkably low cur rent consumption and heat dissipation, the CPS4.10 provides remote standby switching with just 5 Watts consumption in standby mode. An optional remote control module RCM-810 provides control and supervision features via IRIS-Net, including monitoring o f amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 O and 10 O, in steps of 0.1 O
CPS8.5 8-Channel Power Amplifier, 8 x 500W into 2, or 4 Ohms, or 70V/100V Direct Drive, 2U, ready for RCM-810 IRIS-Net Remote Control Module, In/Outputs Phoenix Type, 120V. -Eight channels in one compact rack-efficient unit -500 W per channel -70/100 V operation for distributed systems -Class-D design for optimum efficiency -Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring -IRIS-Net selection of each channel's impedance (2-10 ? in 0.1 ? steps) -Rear-mounted attenuators -Switchable 50 Hz high-pass filter (Hi-Z mode) -Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current -Phoenix-type input and output connections -Remote power-on/off contact -Programmable power-on delay settings -Front-to-rear fans
CPU ACCESSORY
CPU BASE ENCLOSURE
CPU BASE ENCLOSURE
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU BASE ENCLOSURE (CHASSIS BOTTOM)
CPU base enclosure (chassis bottom) - In
CPU BASE ENCLOSURE (CHASSIS BOTTOM) - IN
CPU BASE ENCLOSURE 8440W
CPU Blade for DM-MD128X128
CPU Blade for DM-MD64X64
CPU COOLING FAN
CPU Fan Adapter
CPU FAN ASSEMBLY
CPU heat sink for UCS B440 Blade Server REMANUFACTURED
CPU HEAT SINK for UCS C260 M2 RACK SERVER REMANUFACTURED
CPU HEAT SINK for UCS C260 M2 RACK SERVER REMANUFACTURED
CPU Heat Sink for UCS C460 M4 Rack Server REMANUFACTURED
CPU Heat Sink for UCS C460 M4 Rack Server REMANUFACTURED
CPU heatsnk UCS B22 M3,B200 M1/M2 BladeSrvrs REMANUFACTURED
CPU Holder (Steel)
|
|