 |  | 
Dual 20Gb to Dual 16Gb Fibre Channel Thunderbolt 2 Adapter, LC Long Range Single Mode SFP+ included
Dual 20Gb to Dual 16Gb Fibre Channel Thunderbolt 2 Adapter, LC Long Range Single Mode SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 20Gb to Dual 16Gb Fibre Channel Thunderbolt 2 Adapter, LC SFP+ and IEC C-13 power cord included
Dual 20Gb to Dual 16Gb Fibre Channel Thunderbolt 2 Adapter, LC SFP+ included
Dual 2x1 or 4x2 HD / SD SDI Switch A convenient and economical solution for systems requiring switching of up to 4 input video sources, SDI and / or HD SDI, to 1 or 2 outputs. The DSS-8224 can be configured as a pair of independent 2x1 switches or as a pair of 4x1 switches with common inputs. The DSS-8224 accepts common serial digital signals at 143, 270, 360, 540Mb/s and 1.485Gb/s. All switches are performed in the vertical interval, timed to an external reference. Each switch can be controlled locally at the card-edge by an optional RCM-8120 control module or by GPI. DashBoard and optional SNMP monitoring is provided for input presence, reference present and output status. The DSS-8224 can be combined, on a common control system, with the AVS-8764 to perform multi-level, analog video, AES audio, and HD / SD SDI switching. The DSS-8224 can be configured in auto-changeover mode. In this mode, the secondary input is selected when the primary is lost or lock cannot be achieved. Features Dual 2x1 or 4x2 modes 2 switches on a single module Switches HD SDI and SD serial digital video (143Mb/s to 1.485Gb/s) 4 HD / SD SDI inputs, 2 reclocked outputs Configurable to 4x2, 4x1, 2x1, or dual 2x1 switch 20 2x1 / 10 4x2 switches in 2RU Input selection saved to non-volatile RAM Vertical interval switching compliant with SMPTE RP168-2002 Indicators for input signal presence and reference Flexible control, remote RCM-8120 module, GPI, card-edge 5-year transferable warranty Power: 4.5 watts
Dual 3G Equalizing DA w/ HD-BNC Rear Module Two Independent Channels of 3G/HD/SD-SDI Distribution on one card Reclocking version is highly recommended for 3G distribution Dual 1x8 with included HD-BNC high density R2H rear module Occupies 2 Slots in an openGear frame
Dual 3G-HD-SD-SDI Input Card
Dual 3G/HD/SD distribution amplifier with EQ and reclocking for Densité 3 frame
Dual 3G/HD/SD Optical Receiver LC/PC Connectors
Dual 3G/HD/SD Optical Receiver LC/PC Connectors (Including 3RU Adaptor)
Dual 3G/HD/SD Optical Receiver with WDM LC/PC Connector
Dual 3G/HD/SD Optical Receiver with WDM LC/PC Connector (Including 3RU Adaptor)
Dual 3G/HD/SD optical Transmitter 1310nm & 1550nm with WDM LC/PC Connector
Dual 3G/HD/SD optical Transmitter 1310nm & 1550nm with WDM LC/PC Connector (Including 3RU Adaptor)
Dual 3G/HD/SD optical Transmitters 1310nm LC/PC Connectors
Dual 3G/HD/SD optical Transmitters 1310nm LC/PC Connectors (Including 3RU Adaptor)
Dual 3G/HD/SD SDI DA with EQ and reclocking for Densite 2 frame The HDA-1951 (for Densité-2 series) and HDA-3951 (for Densité-3, Densité-3+ and GV Node series) are dual channel 3G/HD/SD SDI video distribution amplifiers designed for broadcast and production facilities. The two cards are functionally identical, supporting a variety of compressed and uncompressed serial digital video signals, with up to dual 1x5 outputs. The HDA-1951/3951 provides up to ten reclocked outputs with automatic inputs equalization for up to 200 meters (656 feet) of cable using Belden 1694A at 1.5 Gb/s and up to 100 meters (328 feet) at 3 Gb/s. Critical application protection is provided by optional bypass relays available on selected rears. The HDA-1951 and HDA-3951 are dual channel DAs, while the complementary HDA-1941 and HDA-3941 are single channel DAs sharing the same performance quality, but with a lower density and more outputs per DA
Dual 3G/HD/SD SDI DA with EQ and reclocking for Densite 3 frame The HDA-1951 (for Densité-2 series) and HDA-3951 (for Densité-3, Densité-3+ and GV Node series) are dual channel 3G/HD/SD SDI video distribution amplifiers designed for broadcast and production facilities. The two cards are functionally identical, supporting a variety of compressed and uncompressed serial digital video signals, with up to dual 1x5 outputs. The HDA-1951/3951 provides up to ten reclocked outputs with automatic inputs equalization for up to 200 meters (656 feet) of cable using Belden 1694A at 1.5 Gb/s and up to 100 meters (328 feet) at 3 Gb/s. Critical application protection is provided by optional bypass relays available on selected rears.
Dual 3Gbps/HD/SD Distr. Ampl. with EQ & relocking
Dual 40Gb to 8-Port 12Gb SAS/SATA Thunderbolt 3 Adapter
Dual 40Gb to 8-Port 12Gb SAS/SATA Thunderbolt 3 Adapter, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 10Gb Ethernet Thunderbolt 3 Adapter, RJ45 SFP+ included
Dual 40Gb to Dual 10Gb Ethernet Thunderbolt 3 Adapter, RJ45 SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 10Gb Ethernet Thunderbolt 3 Adapter, SFP+ included
Dual 40Gb to Dual 10Gb Ethernet Thunderbolt 3 Adapter, SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 16Gb Fibre Channel Thunderbolt 3 Adapter, LC Long Range Single Mode SFP+ included
Dual 40Gb to Dual 16Gb Fibre Channel Thunderbolt 3 Adapter, LC Long Range Single Mode SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 16Gb Fibre Channel Thunderbolt 3 Adapter, LC SFP+ included
Dual 40Gb to Dual 16Gb Fibre Channel Thunderbolt 3 Adapter, LC SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 25Gb Ethernet Thunderbolt 3 Adapter, SFP28 included
Dual 40Gb to Dual 25Gb Ethernet Thunderbolt 3 Adapter, SFP28, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 32Gb Fibre Channel Thunderbolt 3 Adapter, LC Long Range Single Mode SFP+ included
Dual 40Gb to Dual 32Gb Fibre Channel Thunderbolt 3 Adapter, LC Long Range Single Mode SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 32Gb Fibre Channel Thunderbolt 3 Adapter, LC SFP+ included
Dual 40Gb to Dual 32Gb Fibre Channel Thunderbolt 3 Adapter, LC SFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 40Gb to Dual 40Gb Ethernet Thunderbolt 3 Adapter, QSFP+ included
Dual 40Gb to Dual 40Gb Ethernet Thunderbolt 3 Adapter, QSFP+, CEE 7/7 (SHUKO) power cord and BS 1363 UK10 power cord included
Dual 4GB/s Fibre Channel Atto HBA PCIe
Dual 7" HD Rack Mountable LCD with Composite Inputs (Limited/Discontinued)
Dual 7" HD/SD-SDI Component & Composite 800x480 LED backlit 3RU Rackmount LCD Monitors w/ Waveform and Vectorscope (Postium)
Dual 7" Modular Design Monitor with Composite and Component loop outs
Dual 7" Modular Design Monitor with Composite and Component loop outs The Marshall Electronics V-MD702 Dual High Resolution LCD Rack Mount Monitor (7"), with 2 LED-backlit LCDs and modular input and output, delivers high quality images at a resolution of up to 800 x 480. It offers a contrast ratio of 600:1, a brightness rating of 450 cd/m˛, and a wide viewing angle of 85 x 85° (H x V) that allows you to view the images clearly even from room corners or when the display is mounted at a height. Featured freeze function enables you to bring an image to a still position. The V-MD702 LCD Monitor has an aspect ratio of 16:9, and can automatically adapt to the input resolution of the incoming video signal. The distance between the dots of the same color inside the display screen is described with the help of 0.1905 x 0.1905 mm pixel pitch. With RGB bias and gain function, the LCD monitor allows for fine tuning of color balance levels and facilitates color matching with other types of monitors. The false color filter function allows you to set the correct camera exposure levels. Equipped with pixel-to-pixel mode, the LCD monitor displays images in their native resolution by avoiding the monitor’s internal scaling function. The check field mode allows you to analyze the individual color components of a picture. The monochrome mode displays only grayscale image by disabling all colors, and in blue, green, and red check field modes only the selected color is displayed. With marker settings, you can control all on-screen markers, and this is also applicable for center marker, full screen markers, 16:9 markers, and 4:3 markers. Featured mosquito filter removes mosquito noise (distortion that appears near crisp edges of objects) that arises due to compression of video. The ratio settings allows for switching between full screen, 4:3, and 16:3 aspect ratios. The Blue only feature switches red and green scan guns to produce an image made only from a blue scan gun. The V-MD702 Dual High Resolution LCD Rack Mount Monitor incorporates user-programmable F1, F2, F3, and F4 to assign various functions like ratio, check field, mosquito filter, false colors, freeze input, aspect markers, center marker, marker enable, pixel-to-pixel as required. It features an Ethernet port on the back to provide complete access to all the settings. 2 LED-backlit LCDs Modular input and output Delivers high quality images at a resolution of up to 800 x 480 Offers a contrast ratio of 600:1, a brightness rating of 450 cd/m˛, and a wide viewing angle of 85 x 85° (H x V) that allows you to view the images clearly even from room corners or when the display is mounted at a height Freeze function enables you to bring an image to a still position Can automatically adapt to the input resolution of the incoming video signal with aspect ratio of 16:9 Distance between the dots of the same color inside the display screen is described with the help of 0.1905 x 0.1905 mm pixel pitch RGB bias and gain function allows for fine tuning of color balance levels and facilitates color matching with other types of monitors False color filter function allows you to set the correct camera exposure levels Pixel-to-pixel mode displays images in their native resolution by avoiding the monitor's internal scaling function Check field mode allows you to analyze the individual color components of a picture Monochrome mode displays only grayscale image by disabling all colors, while in blue, green, and red check field modes only the selected color is displayed Marker settings controls all on-screen markers and is applicable for center marker, full screen markers, 16:9 markers and 4:3 markers Ratio settings allows for switching between full screen, 4:3, and 16:3 aspect ratios Mosquito filter removes mosquito noise (distortion that appears near crisp edges of objects) that arises due to compression of video Blue only feature switches red and green scan guns to produce an image made only from a blue scan gun Incorporates user-programmable F1, F2, F3, and F4 to assign various functions like ratio, check field, mosquito filter, false colors, freeze input, aspect markers, center marker, marker enable, pixel-to-pixel as required Features an Ethernet port on the back to provide complete access to all the settings Incorporates color temperature presets, hard tally features Rack mountable Features composite, component inputs
Dual 7" Modular Design Monitor with One Slot & No Analog Inputs, accepts Type "A" Modules
Dual 7" Rack Mount Monitor
Dual 7" Rack Mount Monitor
Dual 7" Rack mountable with HDMI, 3G-SDI, Component, Composite Inputs and Loop-Through (Waveform and Vectorscope) The Marshall Electronics M-LYNX-702 Dual 7" 3G-SDI Rackmount Monitor features two 7" LCD displays with 1200 x 800 resolution each housed in a single, 3RU rackmoutable non-tilting frame. It features 3G-SDI, HDMI, and analog connectivity for both HD and SD video sources. It is designed to be used in a multitude of production, surveillance, or industrial applications. Possible applications include fly-packs, control rooms, routing rooms, live switching, or anywhere else individual video feeds require their own dedicated monitor. The LCD panels in the M-LYNX-702W have a 400 cd/m˛ brightness, a 800:1 contrast ratio, and a viewing angle of 178°°. With a 1200 x 800 resolution, they feature a native aspect ratio of 16:9. Each display in the M-LYNX-702W features a 3G-SDI input with loop-out, an HDMI input with loop out, a component input with loop-out, a composite input with loop-out, and a stereo analog audio input. In addition, there is a headphone jack on the front panel below each display for local audio monitoring. Finally, a GPI port allows the display to be connected to tally systems as well as wired remote controls. The M-LYNX-702 is designed for installation in standard 19" racks, and has a rack height of 3RU. It includes a 12V power supply and can also be powered from 12 VDC sources via either 4-pin XLR or a 5.5mm barrel connector. A single power supply powers both LCD panels. Selectable, user-defined markers 1:1 pixel mapping (pixel-to-pixel) Overscan and H/V delay View individual color channels Built-in red, blue, and green LED tally indicators Selectable English or Spanish on screen display Dual mode, full screen or compact overlay Display Luminance waveform, Parade waveform (RGB or YPbPr), Vectorscope, Histogram, Audio Bars and Audio Phase Meter
Dual 7" Rackmount 1024x600 Display
Dual 7" Rackmountable with HDMI, 3G-SDI, Component, Composite Inputs and Loop-Through (Waveform and Vectorscope)
DUAL 7-IN RACK DISPLAY MONITOR w/HDMI
Dual 8-inch two-way, Vari Intense® 110°/65° x 65° in low-profile underbalcony/low-ceiling configuration, flying, black. EBK-1 eyebolt kit sold separately. -Ideal for reverberant spaces. -Variable Intensity horn for even coverage. -Two-way, full-range loudspeaker. -Vented LF enclosure. -1.25-inch HF driver with titanium diaphragm. -PRO Driver protection circuit. -Multi-angled housing. -Stacked, frequency-shaded woofers for pattern control down to 500 Hz. -Three 3/8-inch hanging points. EVI-28 compact low-profile two-way dual-8-inch Vari Intense system For low ceiling applications - horn is angled to throw to the rear five times the mounting height Stacked, frequency-shaded woofers maintain the vertical coverage angle down to 500 Hz for increased clarity and throw in reverberant environments Two hanging points accommodate optional EVI-28MBB (black) or EVI-28MBW (white) U-brackets.
|
|