 |  | 
Dual Link Ethernet Fiber Transceiver (Quad Fiber) 6 Port, Gigabit Ethernet switch with dual link, quad fiber transceivers. The FED-6944 is a dedicated 6 port, Gigabit Ethernet switch. 3 copper ports provide 1Gb/s connectivity for multiple Ethernet enabled devices or links to additional network switches. 4 optical ports provide an Ethernet link over two, dual fiber connections for extended distances. An additional port is available for the OG3 frame’s optional internal GigE controller. The FED-6944 is available in several varieties: The FED-6944-20 transceiver is capable of running up to a 20km link between a 2nd FED-6944-20, or any other transceivers of similar specifications. 40km and 80km variations are also available and achieved by using higher output power transmitters and higher sensitivity receiver SFPs. CWDM options are available in standard and high sensitivity SFPs for use with external CWDM multiplexer and de-multiplexer systems. Up to 16 independent optical signals can be multiplexed down a single fiber. This allows up to 8 full duplex, gigabit Ethernet links over a single fiber, or any combination of audio, video and data optical signals using other Ross Video CWDM fiber products. Features 3 independent copper Gigabit Ethernet ports Copper Ethernet connection: RJ45 Quad LC Optical Connection Internal GigE midplane connection SNMP compliant 5-year transferable warranty Input Optical Sensitivity & Wavelength: 24dBm Output Power & Wavelength: 0dBm @ 1550nm
Dual Link Ethernet Fiber Transceiver (Quad Fiber) 6 Port, Gigabit Ethernet switch with dual link, quad fiber transceivers. The FED-6944 is a dedicated 6 port, Gigabit Ethernet switch. 3 copper ports provide 1Gb/s connectivity for multiple Ethernet enabled devices or links to additional network switches. 4 optical ports provide an Ethernet link over two, dual fiber connections for extended distances. An additional port is available for the OG3 frame’s optional internal GigE controller. The FED-6944 is available in several varieties: The FED-6944-20 transceiver is capable of running up to a 20km link between a 2nd FED-6944-20, or any other transceivers of similar specifications. 40km and 80km variations are also available and achieved by using higher output power transmitters and higher sensitivity receiver SFPs. CWDM options are available in standard and high sensitivity SFPs for use with external CWDM multiplexer and de-multiplexer systems. Up to 16 independent optical signals can be multiplexed down a single fiber. This allows up to 8 full duplex, gigabit Ethernet links over a single fiber, or any combination of audio, video and data optical signals using other Ross Video CWDM fiber products. Features 3 independent copper Gigabit Ethernet ports Copper Ethernet connection: RJ45 Quad LC Optical Connection Internal GigE midplane connection SNMP compliant 5-year transferable warranty Input Optical Sensitivity & Wavelength: 24dBm Output Power & Wavelength: -2dBm @ 1310nm
Dual Link Ethernet Fiber Transceiver (WDM) 7 Port, Gigabit Ethernet switch with dual link, bi-directional fiber transceiver. The FED-6943 is a dedicated 7 port, Gigabit Ethernet switch. 4 Copper ports provide 1Gb/s connectivity for multiple Ethernet enabled devices or links to additional network switches. 2 optical ports provide Ethernet links over two, bi-directional fiber connections for extended distances. An additional port is available for the OG3 frame’s optional internal GigE controller. The FED-6943 is available in 2 varieties: The FED-6943-20A/B transceiver pair is capable of running up to a 20km link between 2 transceivers. The FED-6943-40A/B transceiver pair is capable of running up to 40km link, by using a higher output power and higher receiver sensitivity SFP. Using WDM (Wave Division Multiplexing), a bi-directional link can be obtained using 1310nm and 1550nm wavelengths over a single fiber link. When using WDM single fiber link, the two FED-6943 transceivers at each end of the link must complement each other in regards to their wavelength TX and RX. Features 4 independent copper Gigabit Ethernet ports Copper Ethernet connection: RJ45 2 bi-directional single fiber WDM connection Optical connection: LC Internal GigE midplane connection SNMP compliant 5-year transferable warranty
Dual Link SDI Input Card LX1750, L2K1000, L2K1500
DUAL MIC/LINE I/P MODULE, RCA
DUAL MIC/LINE I/P MODULE, RTB
Dual Mini Plug to Terminal Block Adapter - Gray
Dual Mini SASx4 Device Adapter
Dual Mode LED Cap Red/White Modes
Dual modular 10.1" LCD Rack The Marshall Electronics V-MD1012 features two 10.1-inch LED high resolution (1920 x 1200) displays in a rack-mounted design with easily accessible back panels and swappable input modules. The dual independent displays include fully-adjustable crop, aspect ratio, and markers to dial in any kind of desired framing, as well as an easy-to-use graphical user interface. The V-MD1012 can monitor two independent channels simultaneously, providing accurate details on false color, peaking, audio clipping, color temperature, and more, and includes four user-programmable preset buttons to take you immediately to any monitoring function.
DUAL NL4 CONNECTOR COVER PLATE FOR EVU SERIES ONLY It is a cover plate connected to the 4-pin phoenix contact connector on the back of the loudspeaker. To connect the EVU-CDNL4 cover plate to the loudspeaker, remove the cover plate from the box, remove the 4-pin connector from the input cup, remove and discard the six (6) screws from the input panel on the loudspeaker, secure the black wire (COM) to the negative (-) terminal of the connector, secure the white wire (+)to the positive (+) terminal of the connector, tighten all remaining screws of the connector to ensure they do not rattle during use, reinstall the connector into the pins on the input cup, align the NL4 cover plate holes to the input cup holes and using the six (6) pan head screws, attach the cover plate.
DUAL NON-RECLOCKING 3G/HD/SD SDI DA Low power dual 1x4 or single 1x8 distribution amplifier, 3G/HD/SD/ASI non-reclocking, 2 slots
DUAL NON-RECLOCKING SD SDI DA Low power dual 1x4 or single 1x8 distribution amplifier, SD/ASI non-reclocking, 2 slots
Dual On/Off Outlet
Dual Optical 1x2 Splitter Single mode fiber with optical LC connection in/out Passive optical splitter, manages any data rate 50/50 optical power split with low insertion loss 2 Optical LC in, 4 Optical LC out Occupies 2 Slots in an openGear frame
Dual Optical 1x4 Splitter Single mode fiber with optical LC connection in/out Passive optical splitter, manages any data rate 25% optical power split with low insertion loss 2 Optical LC in, 8 Optical LC out Occupies 2 Slots in an openGear frame
Dual Optical to Electrical Converter Dual channel SDI optical to electrical converter supporting data rates from 143Mb/s to 2.97Gb/s. The FDR-6603 is a dual fiber optic receiver to serial digital SDI converter providing 2 channels of conversion on a single card supporting serial digital data rates from 143Mb/s up to 2.97Gb/s (1080p). SDI outputs are reclocked providing excellent jitter and return loss specifications. The FDR-6603 is fully hot-swappable with all active components on the front removable card. No active components are installed on the rear I/O connection module. This design greatly reduces down-time eliminating any need to access the back of the rack frame. The -R2S high density split rear module can accommodate up to 2 FDR-6603 cards, maximizing the number of conversion channels in a frame. In this configuration, the OG3-FR supports up to 40 independent channel solutions, providing ultra-high density conversion in a 2RU space. Features Optical to Electrical for all SMPTE 424M, SMPTE 259M-C, SMPTE 292M standards Supports single-mode fiber Hot-swappable from front of frame with no external connect / reconnect required Optical input range 1270nm to 1610nm Optical input sensitivity -18dBm Optical input connection: LC / UPC Reclocked SDI outputs Reclocking on all outputs at 270Mb/s, 1.483Gb/s, 1.485Gb/s, 2.967Gb/s, 2.970Gb/s Alarming for signal presence and input sensitivity 5-year transferable warranty Power: 5.5 watts
Dual Output 3GSDI module for MD Camera Top Monitors (Will not support 480p)
Dual Output 3GSDI module for MD Camera Top Monitors (Will not support 480p)
Dual Output Camera Power Supply
DUAL OUTPUT PARALLEL MIXER Designed for permanent installation, the TASCAM MZ-372 offers versatile routing, mixing, and control of multiple audio sources in an attractive easy-to-operate 3U package. For maximium flexability, source content can include music, spoken word (microphone), turntable, and more - all easily controlled via familiar sliders and assignment controls. Features: Maximum flexibility for audio routing, input selection, and multiple redundant output flow, perfect for integrator, musical instrument, and residential applications Multiple inputs include 12 sets of stereo RCA-type, 6 selectable mic/line XLR, and a dedicated front-panel XLR mic input; 19 total input “sets” Channel audio sources can easily be selected, muted, and contoured via simple volume sliders, toggle switches/buttons, and knobs Two redundant output channels each with stereo XLR balanced and unbalanced RCA-type connectors; each with separate volume control Separate stereo booth, recording, and headphone outputs each with independent control One additional mic-compatible XLR input on the front panel with “Talkover” function automatically lowering source audio Independent three-band EQ per each of the 5 channels and a two-band EQ on the additional front panel microphone input Compact 3U rack mount design
DUAL OUTPUT SOFTWARE OPTION FOR INFOCASTER PREMIUM PLAYER 2 Channel output option for InfoCaster premium player. Requires a supported dualhead GPU
DUAL PACK ---HP CC364X ( HP 64X ) Laser Toner Cartridges for the HP LaserJet P4015 / P4515 Laser Toner Printers (24,000 Yield) OEM
DUAL PACK Brother TN227BK Black Toner Cartridge, High Yield. MFC-L3710, L3750, HL-L3210, L3270.
Dual Pack High-Capacity Black (T068120-D2)
Dual pack of the Q2612A - Print Cartridge For Laserjet 1012, 1020, 1022 Ser, 3015, 3020, 3030 All-In-One
Dual Pack Print Cartridge 124A for Color Laserjet 1600, 2600, 2605, Black
dual pak HP Q7553X high yld toner ctg, blk for Laserjet P2015/P2015N
DUAL PCIE SLOT THUNDERBOLT EXPANDER
Dual PDU Mounting Brackets for 24" Wide Eliteand#8482; Cabinets, 2-Pack
Dual PDU Mounting Brackets for 30" Wide Elite Cabinets, 2-Pack
Dual Power Control Module - International Version, 230V
DUAL PPC W/2 X 14" PATTERN
Dual Pro - Note20 5G - Black
Dual Pro - Note20 5G - Red/Black
Dual Pro-Note20 Ultra 5G-Black
Dual Pro-Note20 Ultra 5G-Red/Black
Dual Processor Warp Module 550-600-G, 555 GS
Dual Rack Kit for GT Series Tabletops
DUAL RACK MOUNT BRACKET
Dual rack mount for 1/2 rack wireless components -RE-2, FMR-500, ST-300, and TT-16. RM-D Dual Rackmount Kit for 1/2U Wireless Components from Telex is a kit that can be used to house select Electrovoice components in your standard 19" rack.
Dual rack mount kit (two main components side by side). For use with SSA324, SSA324#U, DSI2008 and DSI2008-CALL and RTS TW components. (Not for use with Audiocom components)
Dual rack mount kit for CIA-1000 only - includes all hardware. Grey color. The RMK-D Dual Rack Mounting Kit for CIA-1000 (Grey) from Telex allows you to install a pair of CIA-1000 call light indicators side-by-side in a standard 1RU rack space. All necessary hardware is included for convenient installation.
Dual Rack Mount Kit for R300 Receiver Dual rack mount kit is hardware package required for proper mounting of two R300 RX receivers into a standard 19-inch audio rack. Rack mount kits and front mount antenna cables are available for the R300 for professional installation. For applications with up to 4 receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds.
Dual Rack Mount Kit For Vaddio 1/2-Rack Enclosures Key Features OneLINK HDMI Interface Quick-Connect USB Interface EasyUSB AudioBRIDGE Interface EasyUSB Mixer/Amp Interface EasyUSB PRO MIC I/O Interface TRIO MIC I/O Interface
Dual rack mount kit mounts 1/2 rack components in center of 19" rack. Includes all mounting hardware. For use with PS2001L, PS4001L, SPS2001, US2002, ES4000A, SPK2000.
DUAL RACK TRAY FOR VSG-4MTG, VSG-4CSD, VSG-4TSG, VSM-4TCG Dual Rack Mount Tray for VSG-4 Series and DL-870 products, BLK-5 blank front filler available (DRT-ADP-1 DRT adaptor required for installing DRT-4 products in the DRT-5 rack tray (CMN-41, CMN-MV, LLM-1770, VSG-401)
Dual Rackmount
Dual Rackmount bracket for ALIP, ALIP GOLD, CATx1000 Series and Infinity products (formerly RMK-ALIP-DUAL)
Dual Rackmount Kit
|
|