 |  | 
F5 IP, SMD LED Video Panel 4-Pack Includes: Flight case, 4 powerCON Linking Cables (2.46ft), 4 etherCON Linking Cables (2.46ft), Control: NOVASTAR Optional Rigging Accessory: F Series Rig Bar, Dual Rig Bar, Ground Support Kit, Concave Curving kit
F51-1161-200 Canon LC101 Ledger Paper 200, 11 X 17
F6 Video Strip IP F6 Strip IP is an outdoor-ready, uniquely shaped 6.9 mm pixel pitch video panel that can be used to line set-pieces and configure designs that compliment other video wall panels in the F-series (F2, F3, F4IP, F5IP). Since it takes HDMI/DVI/SDI directly into the VIP Drive 83R video processor and features the same mapping software (Smart-LCT) as other F-series video panels, there is no need to setup a separate, dedicated video server when using F6 Strip IP with other video panels in the range. Its elongated, die-cast housing makes this product among the lightest and slimmest in its class without compromising its strength. F6 Strip IP runs on the Novastar control platform, and includes 2 diffusion filters (square soft white, square black stealth) for further versatility. FEATURES 6.9 mm pitch high resolution outdoor video strip works with the VIP Drive 83R, using the Novastar control protocol High quality black body LEDs accurately reproduce video at 15 bit grayscale, operating on a customized receiver card from Novastar 5000:1 contrast ratio greatly improves the video performance High performance digital LED drivers deliver 5940Hz refresh rate and a clear, vibrant image Intelligent, modular LED modules with dedicated memory store factory calibration, ensuring optimal image quality, color uniformity, and simplifies maintenance by making service fast and easy 1,000 x 34.5 x 68.2 mm, 4.85 lb (2.2 kg) aluminum extrusion and die-cast housing makes this product among the lightest and slimmest in its class without compromising strength Specialized design supports hardware for end-to-end linking/hanging and 180° angling capabilities Pixel pitch is maintained for 0° end-to-end linking, as well as mounting next to each other, even when the filters are installed Design features to prevent damage to the LEDs when handling: multiple clear, front standoffs keep the LEDs from getting damaged from impacts, and includes specialized LED board design to improve impact resistance up to 3x that of other products, and resilient led mask design to optimize image viewing angle and uniformity without exposing the LEDs to front or side impacts Flexible mounting options include 2pcs adjustable 13mm mounting brackets on either side, as well as 1pc M12 threaded insert in the center Optimized heat dissipation (convection cooled) ensures an even color across the F6 Strip IP Compact power supply, designed solely for this product, increases the stability of the system 2-in-1 power/data cables offer quick connection, and are IP-rated for indoor and outdoor environments PowerKON and etherKON break in, break outs, and 2-in-1 linking cables available 2 Diffusion filters included with the F6 Strip IP (square soft white and square black stealth) VIP Drive 83R Nova required for operation
F617N Dell 300GB 15K 3.5" SAS 6Gbs Refurbished
F80-Q12 WQXGA 12,000 Lumens DLP Laser Phosphor Projector Body ONLY
F9541 DELL SAS UNIVERSAL HARD DRIVE TRAY
FA-BW-RS, FA-BW, 1/2 Wave Flex Antenna, 710-880 MHZ This Telex 1/2 Wave Flex Antenna is intended for use with Telex wireless receivers operating within the 710-880MHz UHF band.
FA-GW, 1/2 Wave Flex Antenna, 610-710 MHZ
FA-RW-RS, FA-RW, 1/2 Wave Flex Antenna, 470-550 MHZ This Telex 1/2 Wave Flex Antenna is intended for use with Telex wireless receivers operating within the 470-550MHz UHF band.
FA-YW-RS, FA-YW, 1/2 Wave Flex Antenna, 525-610 MHZ This Telex 1/2 Wave Flex Antenna is intended for use with Telex wireless receivers operating within the 525-610MHz UHF band.
FAB6 36"X 15' 3"C CSO
FAB6 36"X150'
FAB6 42"X150'
FAB6 50"X150'
Fabric Case - Pixel 4a - Basically Black
Fabric Case for 7" Monitor
Fabric Case for 7" Monitor The Marshall Electronics M-SC7 Camera Monitor Case is ostensibly designed to hold a 7" monitor but will also hold a bevy of accessories such as batteries, cables, mounts and chargers. The padded interior is configurable to suit your needs. It is made from a sturdy Oxford Cloth and is carried by built-in straps. Weather-resistant for light rain for a short period of time Contains a separate compartment and net pocket to place your essential accessories: spare batteries, HDMI cables, sun hood, battery charger, AC adapter, car adapter, camera mount, misc cables, remote control
Fabric Case for Pixel 3 XL in Fog
Fabric Case for Pixel 3 XL in Pink Moon
Fabric Case for Pixel 3a in Fog
Fabric Case for Pixel 3a XL in Fog
Fabric Case for Pixel 3a XL in Seascape
Fabric Case for Pixel 4 in Just Black
Fabric Case for Pixel 4 XL in Just Black
FABRIC WHI TAPE 19MM
Fabric Wrist Strap
FabricExtender slotBlankingPanel for UCS 5108 REMANUFACTURED
FACE DOWN FLAG
FACE DOWN GUIDE
FACE DOWN OUTPUT ROLL ASSY,LJ P3005
FACE DOWN TOP OUTPUT DELIVERY ROLLER
FACE UP TRAY OUTPUT TRAY
FACE UP TRAY ASSEMBLY
FACE UP TRAY ASSY LJ 5000
FACE-UP DROP-DOWN OUTPUT TRAY
FACE-UP DROP-DOWN OUTPUT TRAY
FACE-UP OPEN GUIDE ASSEMBLY
FACE-UP OUTPUT (DELIVERY) TRAY ASSY
Facedown Roller Assembly Used with models: HP 33427A HP 33428A HP 33428B HP 33471A HP 33471AA HP 33471AB HP 33471AD HP 33471AE HP 33471AF HP 33471AG HP 33471AP HP 33471AQ HP 33471AU HP 33471AY HP 33471AZ HP 33471B HP 33481A HP 33481AB HP 33481AX HP 33481AY HP 33481AZ HP C2007A
Faceplate for CLWI-KPLEX-BATT, Anthracite
Faceplate for CLWI-KPLEX-BATT, White
Faceplate for Empty GT Key Bay
Faceplate Satin Finish
Faceplate, 1-Port, light almond
Faceplate, 1-Port, white
Faceplate, 2-Port, light almond
Faceplate, 2-Port, white
Faceplate, 3-Port, light almond
Faceplate, 3-Port, white
Faceplate, 4-Port, light almond
|
|