 |  | 
ADJ. PIPE 96" TO 120"
ADJ. PIPE 96" TO 120" WHITE
Adj. Tools for Roller Sensor (2 pcs.)
Adj. Tools for Top Pos. Sensor (2 pcs.)
Adjustable Distance bar for CURV 500 Array System - BLACK Customized to mount CURV 500 satellites attached to the SmartLink adapter on subwoofers, the CURV 500 speaker pole is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. The base tube can be disassembled for a transport length of 58 cm only.
Adjustable Distance bar for CURV 500 Array System - WHITE Customized to mount CURV 500 satellites attached to the SmartLink adapter on subwoofers, the CURV 500 distance bar is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. The base tube can be disassembled for a transport length of 58 cm only.
Adjustable Distance bar for CURV500 TS Array System - BLACK The CURV 500 TS spacer rod is specifically designed for mounting CURV satellites onto Smart Link adapters and subwoofers and is made of powder-coated steel with an M20 thread at the lower end. It has a steel sleeve with locking screw and safety stud for secure height adjustment. The lower rod can be unscrewed to achieve a transport length of just 60.5 cm.
Adjustable 4-post rack-mount kit for EX and QFX5100 - Certified Pre-Owned
Adjustable boom Adjustable in reach and angle (quick-release screw clamp). Maximum reach of 2.12 ft. Fits onto 3/8" Whitworth thread.
Adjustable Extension Column 2-3 Ft
Adjustable Extension Column 3-5 Ft
ADJUSTABLE EXTENSION COLUMN, PIPE,
Adjustable Extension pole for PSS-650 2 8M Heigh
Adjustable Laptop and Controller Stand With its revolutionary patented design, this laptop stand is extremely robust, lightweight and easy to transport. It is suitable for all formats from 12" to 17" as well as for controllers such as Launchpad, Machine or Push 2. It can be folded to a compact size in seconds. Securely locking eccentric clamps facilitate rapid tilt adjustment and locking of the non-slip rubber-coated shelf and base to provide optimal ergonomic use. The laptop stand is equipped with a table clamp and a clipboard, which are elegantly mounted on the middle rack.
Adjustable Panel Point (replaces spansets) The Adjustable Panel Point for Video allows you to create a hang point on the upper chords of box truss to support video walls. The clamp mounting points are adjustable to work with box truss up to 20.5? wide. The Adjustable Panel Point for Video provides a safe and secure connection and supports weights of up to 500 kg (1100 lb.). The welded eye bolt orients to allow quick connection to video rig bars with standard rigging shackles, round slings, or wire rope. Made from solid bar 6061 T-6 aluminum with a permanently attached eye bolt. Includes (2) Trusst CTC-50HC half coupler clamps designed to fit 50mm (2?) truss chords. Features: Mounts on top of a horizontal truss to create a hang point for video panels or other needs virtually anywhere on the truss length. Adjusts to fit any size box truss with 2” (50mm) chords up to 20.5” x 20.5”. Includes load rated 360-degree wrap around style coupler clamps made of heavy duty extruded aluminum that won’t scratch or damage truss. Rated eye bolt, permanently attached, orients for easy rigging connections using shackles up to 5/8” in size. Made of 6061 T-6 aluminum and graded steel hardware for strength and durability. Built with versatility, safety and durability in mind. Completely anodized in black.
Adjustable Paracord Bracelet
Adjustable Paracord Bracelet
Adjustable Paracord Bracelet
Adjustable Paracord Bracelet
Adjustable Paracord Bracelet
ADJUSTABLE RACK MOUNT FOR DT-V24G11Z, DT-R24L4U MONITORS
Adjustable Shelf for the Wallmount Swing Bracket
Adjustable Speaker Pole 35 mm to M20 - 71" This heavy-duty 35 mm speaker pole sports a male M20 base tube thread and extends from 1.05 to 1.8 m in 7.5 cm increments. It features an unbreakable steel collar, ergonomic set screw knob and safety pin for easy and secure height adjustment.
Adjustable Speaker Pole 35 mm to M20. Height from 32" to 56" The SP 2332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 2332 B features an M20 bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport.
Adjustable Speaker Pole with Crank, 35mm to M20, 1100 mm The Gravity GSP 2472 B is a rugged 35 mm extension rod with practical winding gear for easy raising and lowering of the speaker. It is made of heavy-duty, black powder-coated steel, has a 40 kg load capacity and is height-adjustable from 0.8 m to 1.1 m. The stand is TÜV/GS certified.
Adjustable Stand for 8.4DP and Outdoor Series
Adjustable Stand for 8.4DP and Outdoor Series Mount your Outdoor series or V-R841 monitor on any flat surface with the V-STA84 Adjustable Stand from Marshall Electronics. This stand will easily adjust to accommodate various viewing angles. An integrated carrying handle makes it easy to transport your monitor when on the job site. Easy to grip handle for mobility Adjustable viewing angle
Adjustable stand for DTK1651
Adjustable stand for Laptops and Controllers including Neoprene Protection Bag Featuring a revolutionary patented design, this laptop stand is extremely stable yet lightweight and easily portable. It accomodates all sizes from 12" to 17", controllers such as Launchpad, Maschine or Push 2 and folds to compact transport dimensions in seconds. Eccentric locking clamps facilitate quick and secure tilt adjustment of both the non-slip rubberized support and base for optimum ergonomic setup. The set includes a neoprene protection bag to protect the laptop stand from dirt and scratches.
ADJUSTABLE SUCTION CUP, DOES NOT
ADJUSTABLE SUSPENDED CEILING CHANNEL
Adjustable T-Bar Fork for Speaker Stands The Gravity T-Bar facilitates mounting two loudspeakers on a single stand. It is made of heavy-duty steel with a black powder-coating finish and securely attaches to all 35 mm poles. Width is fully adjustable from 31 to 49 cm.
Adjustable Two Part Speaker Pole 35 mm to 35 mm - 41" t0 56" The SP 3332 TP B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 3332 TP B features a 35 mm bottom end and steel collar with set screw and safety pin to securely lock the extension pole in place. The base tube is a two-piece assembly that can be unscrewed to result in an amazingly short transport length of 54 cm only. The SP 3332 TP B comes with a convenient rubber retainer to secure the safety pin during transport. Interchangeable rings1 x 30 mm
Adjustable Z-Bracket - M32/62, Clear
AdjustableSpeaker Pole 35 mm to 35 mm Drop in - 56" The SP 3332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 3332 B features a 35 mm bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport. Interchangeable rings1 x 30 mm
ADJUSTMENT RAILS (FOR RM3010AandRM3020A)
ADJUSTMENT RAILS (FOR RM3030A @ RM3040A)
Adjustment Tool Kit, HD 5400
Adjustment Tool Kit, HD Ultra
Adler / Canon / Casio / Panasonic Ink Roll, Black
Adler / Canon / Casio / Panasonic Ink Roll, Black
ADLER ROYAL OEM RIBBON FOR ROYAL 13019 A582CX - 2-PURPLE NYLON RIBBONS
Adler Satellite II/2001, Swintec 1146, 1186, 8000 Black
Adler Satellite II/2001, Swintec 1146, 1186, 8000 Black
Adler/Royal Alpha 600, Beta 8000, Signet Series, Black, Pkg of 2
Adler/Royal Alpha 600, Beta 8000, Signet Series, Correctable, Black
Adler/Royal Alpha 600, Beta 8000, Signet Series, Correctable, Black
Adler/Royal Satellite III Correctable, Black
Adler/Royal Satellite III Correctable, Black
ADM on a Blade OC192 3/12/48/GE 16-Client REMANUFACTURED
|
|