StorageStor Index

ANDREW 35' LDF4-50A Jumper with 7/16 DIN Male to 7/16 DIN Male R/A connectors.
ANDREW 35' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard.
ANDREW 350-2700 MHz 8 way splitter/ combiner module for the ION-B DAS system SMA female terminations. +24dBm maximum power.
ANDREW 350-960/ 1710-2170 MHz NODE A RF combiner module for use with two amplifier modules. Slides into either the A2 or A4 subrack.
ANDREW 36 inch twist-flex jumper. PBR-220 flange to PBR-220 flange. 1.25:1 VSWR.
ANDREW 36" WR42 twist-flex jumper. UG-595/U flange to PBR-220 flange. 1.25:1 VSWR.
ANDREW 380-520 MHz Lightning surge bulkhead arrestor. Bulkhead Din-Female to Din-Male.
ANDREW 380-960 MHz RF to optical trans- ceiver module for the ION-B DAS system. Each module feeds 4 remotes. SC/APC fiber terminations.
ANDREW 3M(TM) coldshrink weatherproofing Kit. Seals the connection between a 1-1/4 or 1-5/8" to 1/4" jumper w/N or DIN Connector.
ANDREW 3M(TM) coldshrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector.
ANDREW 3M(TM) coldshrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes.
ANDREW 3M(TM) coldshrink weatherproofing Kit. Seals the connection between two separate lines of 3/8-1/2" cable. Installs in less than three minutes.
ANDREW 4 AWG 3 Conductor Bare Copper with THWN-2 Insulation with BC Spiral Wrap and a PVC Binder
ANDREW 4 position subrack for NODE A+ selective multi-band repeater. N Female antenna ports QN female interconnect ports. -48 VDC powered.
ANDREW 4 position subrack for NODE A+ selective multi-band repeater. N Female antenna ports QN female interconnect ports. 100-240 VAC powered.
ANDREW 4 Run PVC Sleepers for roof-top bridge kits
ANDREW 4" Cable Entry Boot. For 1 run of EW220. Use with Multiple Entrance Wall Plate.
ANDREW 4" Cable Entry Boot. For 1 run of EW52. Use with Multiple Entrance Wall Plate.
ANDREW 4" Cable Entry Boot. For 1 run of EW63. Use with Multiple Entrance Wall Plate.
ANDREW 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate.
ANDREW 4' Parabolic Radome. Unheated
ANDREW 4' Square Ice Shield. Includes universal saddle mount and hardware kit.
ANDREW 4' Superflexible Jumper with FSJ1-50B cable and N Male connector to TNC Male connector.
ANDREW 4' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male connectors on each end. PREMIUM LOW PIM JUMPER with Sureguard.
ANDREW 4' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male connectors on each end. PREMIUM LOW PIM JUMPER.
ANDREW 4' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with N Male connectors on each end. PREMIUM LOW PIM JUMPER.
ANDREW 4' SureFlex Jumper. Consists of FSJ1-50A 1/4" superlexible foam cable with N Male (silver plated body and gold plated pin) connectors for each end.
ANDREW 4' SureFlex Jumper. Consists of FSJ1-50A 1/4" superlexible foam cable with N Male on one end and SMA Male on the other end
ANDREW 4' SureFlex Jumper. Consists of FSJ1-50A 1/4" superlexible foam cable with SMA Male on both ends.
ANDREW 4' Teglar Radome. White.
ANDREW 40' LDF4-50A Jumper with 7/16 DIN Male connectors on each end. PIM Certified.
ANDREW 410-512 MHz DualPol Panel Antenna. 65 degree horizontal bw 0 degree beam tilt. 12.9 dBd. DIN Female connector. Includes hardware.
ANDREW 450-470 MHz 5 watt amplifier module for the NODE A repeater. 25dBm UL/36dBm DL composite power. 94dB gain. Slides into subrack.
ANDREW 47" FlexTwist Section for WR137 6.425-7.125 GHz with interface types UG-344/U and CPR137G flanges.
ANDREW 4ft Twist-Flex jumper. WR42 FLEX TWIST1000MM UG-595/U-PBR220
ANDREW 4x4 High Power Hybrid Matrix 555-2700 MHz. 7-16 DIN Female connectors 100W average power.
ANDREW 5' jumper. Consists of FSJ250 SureFlex cable with N-Male on one end and N-Male on the other end.
ANDREW 5' SureFlex Jumper. Consists of FSJ2-50 3/8" superflexible cable with DIN Female Bulkhead on one end and DIN Male Right Angle on the other end.
ANDREW 5.0 - 6.426 PDR70 flange type Fixed/Tuned connector. Used with EW52 elliptical waveguide.
ANDREW 5.60-6.425 GHz (EW52) elliptical waveguide standard jacket. **Use sku 576827 if ordering cable w/out attached connectors.
ANDREW 5.60-6.425 GHz waveguide pressure window. UG-344 Interface mates to UG343B/U
ANDREW 5.725 - 6.425 GHz 35" Twist-Flex Section. WR137 waveguide size with type CPR137G flanges. 1.05 VSWR.
ANDREW 5.725-6.425 GHz (EWP52-58) premium elliptical waveguide standard jacket.
ANDREW 5.800-7.125 GHz (EWP63-59W) premium elliptical wave guide standard jacket. Add sku# 576827 to the order or worksheet.
ANDREW 5.85-8.2 GHz waveguide pressure window. CPR137G flange type.
ANDREW 5.85-8.20 GHz 12" FlexTwist Sectiion for WR137 with interface types CPR137G and CPR137G.
ANDREW 5.85-8.20 GHz 24" FlexTwist for WR137 with interface types CPR137G and CPR137G 600mm.
ANDREW 5.85-8.20 GHz 48" FlexTwist for WR137 with type CPR137G to CPR137G flanges.
ANDREW 5.925-6.425 GHz (EWP52-59) premium elliptical wave guide standard jacket.
ANDREW 5.925-7.125 GHz (EW63) elliptical wave guide standard jacket. **ALL waveguide needs to be pressurized. Add sku# 576827 to order or worksheet.