StorageStor Index

ANDREW Snap-In Adapter Block. Attaches to tower with 3/8" hardware or round member adapters. (purchase separately). 10 Pack.
ANDREW SnapSeal 4" boot assembly kit w/ 1 hole for 1-1/4" corrugated coax.
ANDREW SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax.
ANDREW SnapSeal 4" boot assembly kit w/ 4 hole for 1/2" corrugated coax.
ANDREW SnapSeal 4" boot assembly kit w/ 6 holes for 1/4" corrugated coax.
ANDREW SnapSeal 4" boot assembly kit w/ 6 holes for 3/8" corrugated coax.
ANDREW SnapStak Hanger for 1-1/4" coaxial cable triple stack capability includes reinforcement bar.
ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers.
ANDREW Solid wave guide channel. 10' long by 12" wide. Provides support and protection for horiz. wave- guide runs. 11 gauge galvanized steel.
ANDREW Splice for Waveguide EW180 and EWP180.
ANDREW Spring Nut Kit. Includes spring nuts and square washers. 1-5/8" x with 3/8"hole. Kit of 10.
ANDREW Square Tube Pipe Mount Bracket 3.5" OD pipe to 4" Square Tube.
ANDREW Stainless steel Angle Adapter. Fastens hangers to tower angle members up to 7/8" thick. For use w/ 1/2" to 4" cables. 10 per package.
ANDREW Stand-off bracket for wood pole antenna mounting.
ANDREW stand. port cushion. For 1-1/4" corrugated cables. One hole.
ANDREW stand. port cushion. For 1-5/8" corrugated cables. One hole.
ANDREW stand. port cushion. For 1/2" corrugated cables. One hole.
ANDREW stand. port cushion. For 1/2" corrugated cables. Three hole.
ANDREW stand. port cushion. For 5/8" corrugated cables. One hole.
ANDREW stand. port cushion. For 7/8" corrugated cables. Four hole.
ANDREW stand. port cushion. For 7/8" corrugated cables. One hole.
ANDREW stand. port cushion. For 7/8" corrugated cables. Three hole.
ANDREW stand. port cushion. For 7/8" corrugated cables. Two hole.
ANDREW standard ground kit for 1-5/8" EW52 & EW63 w/ 24" factory attached two hole universal lug and weatherproofing.
ANDREW Standard grounding Kit for 5/8" & 7/8" (85 90 127A & 132 waveguide) w/ 24" lead and factory attached two hole lug.
ANDREW Standard Hangers for EW43 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack.
ANDREW Standard Molded 10' Diameter Radome. Protects microwave antenna from accumulation of ice snow and dirt and reduces wind loading. *DROPSHIP ONLY*
ANDREW Star Support Tee Bracket. Supports up to 16 runs of cable. 1-1/2" - 5-9/16" OD round members or 2.5" to 4" angle members.
ANDREW Static desiccator. Eliminates moisture in very small transmission lines. 1/8" NPT fitting. Can be used indoor or outdoor.
ANDREW Steel Bundle for Snub Nose Platform.
ANDREW Steel Bundle for Tower Face Mount. TF-M2-8.
ANDREW Steel Bundle for Tower Face Mount. TF-M3-8.
ANDREW Stiff Arm Adapter Kit. Universal for 1-1/4" to 3-1/2" OD pipe up to 4-1/2" tower legs.
ANDREW straight Coax Adapter. N male to Din female Tri-metal finish to prevent tarnishing. Hex headed.
ANDREW straight Coax Adapter. N male to Din male Tri-metal finish to prevent tarnishing. Hex headed.
ANDREW straight Coax Adapter. N-Female to N-Female. Tri-Metal finish to prevent tarnishing.
ANDREW straight Coax Adapter. N-Female to TNC Male.Tri-Metal finish to prevent tarnishing
ANDREW Straight/Hinged splice for solid waveguide bridge channel. Hardware included.
ANDREW Strut Collar Assembly
ANDREW Support Arm with 36" stand-off with 4.5" OD x 18" mounting pipe. For use with Ring Mount system. Order cellular pipe frame separately.
ANDREW Support Arm with 36" stand-off with 4.5" OD x 18" mounting pipe. For use with Ring Mount system. Order cellular pipe frame separately.
ANDREW Support Bracket for 12" wide waveguide bridge channel. Use with 3-1/2" OD pipe columns.
ANDREW support hoisting grip for 1/4" ATCB-B01 series RET cable.
ANDREW Support/Hoisting Grip for 1/2" Superflex Cable. Use at 200ft intervals to raise cable on tower. Includes one grip and one support clamp.
ANDREW Support/Hoisting Grip for 5/8" coaxial Cable. Use at 200ft intervals to raise cable on tower.Support clamp included.
ANDREW SureGround for 1-1/4 in copper or aluminum smooth or corrugated cable w/ 48 in lead unattached universal lug and weatherproofing.
ANDREW SureGround for 1-1/4" copper or smooth cable w/ 24" #6 copper ground wire. Copper. Includes lug hardware one roll of PVC and 24" butyl tape.
ANDREW SureGround for 1-5/8" cable. Consists of cable clamp 4' tinned copper strap. A two part tape weatherproofing system & field attached 2 hole lug.
ANDREW SureGround for 1/2 in Alum or Copper corrugated or smooth cable w/ 24 in #6 copper ground wire lead. Inlcudes factory attached two hole lug.
ANDREW SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached 2 hole lug.