 |  | 
ANRITSU Attenuator 30dB 150W 3Ghz N-Male - N-Female
ANRITSU Battery charger for use with recharable Li-Ion battery only.
ANRITSU Cable Sweeper 2 MHz to 4 GHz built in Spec Analyzer 100kHz to 4GHz. With color screen and N-F connectors. *Calibration Components Required
ANRITSU cable sweeper 2 MHz to 4 GHz. With battery carry case AC/DC adapter cig adapter PC software USB cable manual. *CAL COMPONENTS NOT INCLUDED.
ANRITSU consisting of MT9085A: Optical test platform MT9085A-063
ANRITSU Directional Antenna 698 MHz - 2500 MHz N Female Connector gain of 2 dBi to 10 dBi
ANRITSU Gigabit Ethernet Tester Module (with two RJ-45 ports)
ANRITSU GPS Magnet Mount Antenna for Option 31.
ANRITSU InterferenceHunter Handheld Direction Finding System
ANRITSU Isotropic Antenna 20 MHz to 2.1 GHz
ANRITSU ITU-T Y.1564 test (for MU909060A2)
ANRITSU Low PIM Adapter 4.1/9.5(m) to N(m) DC to 3.0 GHz 50 ohms
ANRITSU Low PIM Adapter 4.3-10(m) to N(m) DC to 6.0 GHz 50 ohms
ANRITSU LTE Dipole Antenna 698-960/1710-2170/2500-2700 MHz SMA(m) 2 dBi typical
ANRITSU Mainframe
ANRITSU MPLS (for MU909060A2)
ANRITSU N-Female to 7/16 DIN Male adapter. RoHS Compliance.
ANRITSU N-Female to N-Female precision adapter. DC-18Ghz
ANRITSU N-Male to 7/16 DIN Female adapter. RoHS Compliance.
ANRITSU N-Male to 7/16 DIN Male adapter. RoHS Compliance.
ANRITSU N-Male to N-Male precision adapter. DC-18Ghz
ANRITSU phase stable cable for the Site Master (all models). Used for connecting the Site Master to the cable under test. N-male to 7/16 DIN Female. DC to 6 G
ANRITSU phase stable cable for the Site Master. Used for connecting the Site Master to the cable under test. N-male to N-Female. 6Ghz
ANRITSU phase stable cable for the Site Master. Used for connecting the Site Master to the cable under test. N-male to N-Female. DC - 6Ghz
ANRITSU phase stable cable for the Site Master. Used for connecting the Site Master to the cable under test. N-male to N-male. DC to 6Ghz
ANRITSU phase stable cable for the Site Master. Used for connecting the Site Master to the cable under test. N-male to N-male. DC to 6Ghz
ANRITSU PIM Master Hard case Accessory Kit
ANRITSU PIM Master Option 700; LTE 700MHz Frequency
ANRITSU Portable yagi antenna for the handheld spectrum analyzers. 824-896 MHz N/F connection 50 ohm. RoHs compliance.
ANRITSU Precision N(f) Load; 6.0 GHz; 42dB
ANRITSU Precision N(m)Load;6.0 GHz; 42dB
ANRITSU precision short-open N/M type connector used in calibrating any Site Master. DC to 18Ghz
ANRITSU Remote GUI (for MU909060A2)
ANRITSU Replacement LI-Ion Battery initial capacity of 8000 mAh MS2721A MS272xB MS272xC MS271xE MT821xE S3x1E S3x2E and S412E
ANRITSU RFC 2544 test (for MU909060A2)
ANRITSU Site Master 2 MHz to 4 GHz Cable and Antenna Analyzer with built-in Power Meter 50 MHz to 4 GHz. *Needs Calibration Components
ANRITSU Soft Carry Case for Site Master. S3XXE MS271XE MT821XE MS20XXB
ANRITSU Soft Carrying Case for MS2721B thinner 77mm instruments (MS272XB MS272XC MS202XC MS8911X)
ANRITSU Transit Case
ANRITSU Transit Case for S331L
ANRITSU USB-Ethernet converter
ANSER Spot Desk Light. 18" Gooseneck and Dimmer w/ Weighted Base. No power supply.
ANT PLUS Cell PCS LTE&GPS combo surface mnt ant. 3.0dBd gain 15' cable with TNC Male on end. Omni direct color wht. (AP-CG-Q-S12-WH)
ANT PLUS Cellular PCS LTE & GPS combo surface mnt ant. 3 dBd gain.(2)15' cable with TNC Male. Omni direct. Wht. (AP-CG-Q-S11-WH)
ANT PLUS Cellular PCS LTE & GPS combo surface mnt ant. 3.0dBd gain15' cable with TNC/TNC. Omni direct color black. (AP-CG-Q-S11-BL)
ANT-3x3-2005, MIMO, Omni, 5 dBi, 2.4 GHz, Direct mount to chassis or remoted with N male to N female cable x3)
ANT-3x3-5005, MIMO, Omni, 5 dBi, 5 GHz, Direct mount to chassis or remoted with N male to N female cable x3)
ANT-3x3-5010, MIMO, Omni, 10 dBi, 5 GHz, Direct mount to chassis or remoted with N male to N female cable x3)
ANT-3x3-D608, MIMO, Sector 60, 2.4/5 GHz,Requires N male to N male cables x3)
ANT-4x4-5314 5.15-5.9GHz 14dBi 30x30deg Quad Pol MIMO Hi Gain Dir N-Type Outdoor Antenna
|
|